Milab - VIP-60 Agrandir l'image
Product name Milab VIP-60
Type Condenser
Article number 1160
Frequency response 20 to 20,000 Hz
Polar pattern Cardioid, Wide Cardioid, Hypercardioid, Omni, Bidirectional
Filters 200 Hz & 500 Hz (switchable)
Pre-attenuation pad -10 dB & -20 dB (switchable)
Max. SPL (1 % THD at 1 kHz) 118 dB
Max SPL with 10 dB pad 128 dB
Max SPL with 20 dB pad 138 dB
Sensitivity at 1 kHz 14 mV/Pa (± 1 dB)
A-weighted noise level (IEC 179-A) 14 dB
Power supply 48 ± 4 V Phantom (DIN/IEC)
Current consumption 4 mA
Output impedance <200 Ω
Minimum load impedance 1 kΩ
Connection 3-pin XLR
Length 170 mm
Width 47 mm
Depth 50 mm
Net weight 400 g

Plus de détails

MILAFYOS1O

Nouveau

Milab - VIP-60

Milab

37 years after the introduction of its predecessor, the brand new VIP-60 boasts an updated capsule and optimized circuitry to bring the sound of the classic VIP-50 into the 21st century.

How do you reinvigorate an iconic microphone without losing the “magic” in the process?
The Milab R&D team used a careful and meticulous approach which included an 18-month testing period with feedback from a number of highly skilled engineers in Sweden, Germany, the UK and the US. The result is a microphone with a superior performance when compared to its predecessor – most notably a significant reduction in self-noise – but fans of the VIP-50 will still recognize the unique sound with its ribbon-like warmth and sparkly highs – and, of course, the extremely smooth off-axis response.

This is a microphone that has been designed to be the crown jewel of any studio, and it has the sparkly Nextel metallic finish to prove it. The VIP-60 will not only be the champion of the vocal booth, but will also do a beautiful job on many other sources. The unusual 500 and 200 Hz roll-off filters are useful for dealing with the proximity effect when close-miking sources like a guitar amp or a double bass.

The VIP-60 offers five different polar patterns and a selection of filters and pre-attenuation pads. It is delivered in an SKB 3i waterproof case with a Rycote InVision USM shockmount. Factory matched pairs are available.

Features And Specs

Product name Milab VIP-60
Type Condenser
Article number 1160
Frequency response 20 to 20,000 Hz
Polar pattern Cardioid, Wide Cardioid, Hypercardioid, Omni, Bidirectional
Filters 200 Hz & 500 Hz (switchable)
Pre-attenuation pad -10 dB & -20 dB (switchable)
Max. SPL (1 % THD at 1 kHz) 118 dB
Max SPL with 10 dB pad 128 dB
Max SPL with 20 dB pad 138 dB
Sensitivity at 1 kHz 14 mV/Pa (± 1 dB)
A-weighted noise level (IEC 179-A) 14 dB
Power supply 48 ± 4 V Phantom (DIN/IEC)
Current consumption 4 mA
Output impedance <200 Ω
Minimum load impedance 1 kΩ
Connection 3-pin XLR
Length 170 mm
Width 47 mm
Depth 50 mm
Net weight 400 g

Commander

Milab - VIP-60

Milab - VIP-60

Veuillez patientez...

Pour le moment, M2M Pro a choisi la relation directe avec ses clients.
Les ventes, demandes d'offres et prix... se font via ce formulaire.
N'hésitez pas à prendre contact avec nous pour toute autre question.












* Champ requis