> Channel Strips

Channel Strips  Il y a 13 produits.

  • Afficher :
par page
  • API - The Channel Strip

    API 512c Mic Preamplifier API 550A Equalizer API 527 Compressor API 325 Line Driver Complete patching facilities on rear panel Two ten segment LED VU displays Output clips at +30dBm   Specifications Power Consumption, Quiescent: 28.2 Watts Size: 19" X 1.75" (1U) X 11.5" Deep Size (Boxed for Shipping): 23.25" X 6.5" X 16" Actual...

  • AVALON - VT-737SP

    Pure Class A - Direct Signal Path   Circuit topology    Four dual triode vacuum tubes (Sovtek 6922), high-voltage discrete Class A Gain Range    Microphone: Transformer balanced 850/2500 ohm, 0dB to +58dB Instrument: Unbalanced 1 meg ohm, 0dB to+30dB Line: Balanced Class A 20k ohms, -27dB to 28dB Maximum input level and connector types    Microphone:...

  • DBX - 676

    Features Class-A Vacuum Tube Preamp with High Voltage Gain High-Visibility Vintage VU Meter Compressor designed from the dbx162SL 3-Band Semi-Parametric EQ 1/4” and XLR Inputs and Outputs Front Panel Instrument Input Side Chain Insert Specifications Mic Preamp Connector Female XLR Pin 2 Hot; Electronically balanced/unbalanced Mic Preamp Input...

  • EMPIRICAL - EL9 Mike-E

    Freq. Response is 3 Hz to 200 kHz on (No CompSat). CompSat is 3Hz – 150Khz. Optional Transformer output is 6Hz–80kHz. Signal to Noise - 130 dB signal to Noise.at 40dB gain. Maximum output is +28dBu. Distortion Ranges between .0006% and 15% depending on mode and settings. Transformer coupled Input, Active and Transformer Outputs available. High quality...

  • FOCUSRITE - ISA 430 Mk II

    Line Gain Range +10dB to +40dB continuously variable Input Impedance >1M Ohm Mic Gain Range 0 to +60dB in 10dB steps Input Impedance Variable as follows: 600 Ohm, 1k4 Ohm, 2k4 Ohm, 6k8 Ohm EIN -128dB with 150 Ohm terminating impedance at 60dB of gain Noise -97dBu THD 0.001%...

  • MANLEY - Core reference channel strip

    ALL-TUBE preamplifier audio path using 1 x 12AX7 for gain and 1 x 6922 White FollowerBalanced Transformer Coupled XLR Microphone Input Impedance: 1200 OhmsBalanced XLR Line Input Impedance: 10 kOhmsUnbalanced 1/4" Direct Input Impedance: 10 Meg OhmHi-current drive Direct XLR output Impedance: 50 OhmsSilent conductive plastic INPUT attenuatorMicrophone...

  • MANLEY - Voxbox

    MANLEY transformers w/nickel laminations in mu-metal cases 2 kOhm MIC INPUT Z w/High current 48V Phantom power built-in Hi-Z (100K) Direct Instrument Input LINE & INSERT INPUTS (balanced XLR & 1/4") PREAMP & EQ outputs LO-Z (50 Ohms) Transformer balanced XLR outputs Transformerless unbalanced 1/4"outputs STEREO LINK for Compressor &...

  • MILLENNIA - STT-1 Origin

    Microphone Preamplifiers & General:   Twin Topology Mic Preamplifier Selection Switchable, Vacuum Tubes or Solid-State Twin Topology EQ & Compressor Switchable, Vacuum Tubes or Solid-State Twin Topology Input Coupling Switchable, Transformer or Transformerless Maximum Output Level (Balanced) + 32 dBu Frequency Response (+0...

  • MILLENNIA - TD-1

    Preamplifiers and General:   Instrument / DI Input Amplifier Twin Topology® TUBE: Selected twin triode vacuum tube amplifier (200 V) SOLID STATE: Selected all discrete J-FET amplifier (50 V) THD + Noise (20 Hz - 30 kHz (35 dB Gain)) 0.0005% typical mic / line, 0.03% typical vacuum tube Intermodulation Distortion 0.0009% typical mic...

  • Neve - 8801 Channel Strip

    Contained in a single rackmount unit, the 8801 combines a classic Neve mic preamplifier and equalisation circuitry with an incredible 88R-style dynamics processor. Complete channel strip from the revered 88RS console in a single rackspace Hand-built and hand-wired by Neve in Burnley, England Genuine Neve mic preamp with High and Low Pass Filters 4-band...

    0 €HTVA
  • RUPERT NEVE - Portico II Channel

    Mic PreFrequency Response: Main Output, no load -3 dB @ 2 Hz -3 dB @ 160 kHzNoise: Measured at Main Output, unweighted, 22Hz-22kHz, Terminated 150 Ohms. With gain at unity better than -92 dBu With gain at 66 dB better than -56 dBu Equivalent Input Noise better than -123 dBuGain: Unity to +66dB in 6 dB steps, Trim continuously adjustable from -6dB to...

  • Summit Audio - ECS-410 Everest Channel Strip

    Size and Weight Height: 3.5 inches (8.89 cm) Width: 19 inches (48.26 cm) Depth: 17 inches (43.18 cm) Weight: 26 pounds (11.79 kg) Power Configuration Internal AC Supply 100VAC-240VAC (different fuse for 100V, 115V, and 240V) Dc1 Dual Mode Compressor Data Size and Weight THD+N: (@+4dB, with no compression...

Résultats 1 - 12 sur 13.