> Egaliseurs & Enhancers

Egaliseurs & Enhancers  Il y a 54 produits.

  • Afficher :
par page
  • A-DESIGNS - EM-EQ2

    PULTEC STYLE EQ ​Dual Mono Operation • Spectacular Sonics   Dual mono, three-band band, Pultec-style EQ. Faithfully preserves the EQ section design, controls, and musicality of the Pultec EQP-1. Eminently suited for tracking, mixing, or mastering. Same frequency settings and inductors as original Pultec make it a must-have for capturing bottom end....

  • A-DESIGNS - HM2EQ HAMMER

    HAMMER 2 EQ DUAL CHANNEL TUBE EQ ​World-Class Sound Quality • Amazingly Easy to Use   World-class, three-band, dual-mono tube/hybrid equalizer Designed to sound highly musical for larger EQ functions typically found on expensive mastering.. Smooth, super-fidelity EQ, suitable for very high-end applications. Beautiful-sounding broad EQ-shaping across...

  • API - 215L Discrete HP/LP Sweep Filter

    Wide range 6 dB per octave LOPASS control Wide range 12 dB per octave HIPASS control Balanced input stage Passive filter design for smooth tone Unity gain throughout Hard Wire BYPASS switch Transformer Coupled Output to +28 dBu All Discrete Design   Specifications Number of Bands: Two Filter Type: Passive Sweepable Shelf Filter...

  • API - 5500 Stereo/Dual Mono 550 EQs with Range Switch

    Classic 550b Equalizer design Two range switches to individually alter gain steps Usable as a 550b, 550D or 550M Peak/shelf switch on Hi and Lo bands True hardwire bypass Balanced In and Out on XLR Unbalanced input on 1/4" EQ In/Out switch   Specifications Power Consumption, Quiescent: 17.04 Watts Size: 19" X 1.75" (1U) X 11.25" Deep...

  • AVALON - AD2055

    Dual Mono, Pure Class A Parametric Music Equalizer   Pure Class A, 100% discrete design Smooth musical detail and sonic excellence Minimum audio signal path Dual mono operation Transparent active and passive filter design High headroom +30dB Very low noise -94dB Fully balanced inputs and outputs DC coupled, no transformers in audio path Switched...

  • AVALON - AD2077

    Dual Mono, Pure Class A Mastering Equalizer   Pure Class A, 100% discrete design Smooth musical detail and sonic excellence Minimum audio signal path Dual mono, fully switched controls Transparent active and passive filter design Very low noise -94dB High headroom +30dB  Fully balanced inputs and outputs DC coupled, no transformers in audio path 104...

  • AVALON - VT-747SP

    Pure Class A - Tube Discrete Spectral Opto-Compressor Equalizer   Stereo Class A opto-compressor with spectral control Stereo Class A six band discrete passive program EQ TSP twin signal path, vacuum tube bypass Low noise -92dB Fully balanced Class A input and DC coupled outputs Stereo dynamic 60dB high resolution output meters High quality analog...

  • Charter Oak - K500

    FREQUENCY RESPONSE 20Hz-22kHz, +0.3dB / -0.5dB (EQ out); +0.3dB / -0.10dB (EQ in) HARMONIC DISTORTION (ref. 6V): 0.085% MAXIMUM OUTPUT 10V RMS SIGNAL TO NOISE RATIO -96dB ref. to 1kHz @ +4dBu

    0 €HTVA
  • Charter Oak - PEQ-1 Program EQ

    FREQUENCY RESPONSE 20Hz-20kHz w/in 0.4dB -3dB down at 60 kHz HARMONIC DISTORTION 0.01% below +21dBu MAXIMUM OUTPUT +23dBu SIGNAL TO NOISE RATIO -85dB referenced to +4dBu MAXIMUM OUTPUT +23dBu INPUT IMPEDANCE 600 Ohms balanced OUTPUT IMPEDANCE 600 Ohms balanced DIMENSIONS Standard 2RU / Length 19” Height 3.5”

    2 597 €HTVA
  • Crane Song - Ibis

    Input: Floating, balanced. Maximum input is +25 dBm. The connectors are XLR. Output: Floating, balanced. Maximum output is +25 dBm. The connectors are XLR. Input and Output : Pin 2 is Sig + , Pin 3 is Sig- , Pin 1 is GND Connections Power: 100, 120, 230,240 volt; 50/60 Hz; 55 watts MDL .6A Fuse for 100V and 120V MDL .3A Fuse for 230V and 240V Noise:...

    0 €HTVA
  • Dangerous Music - Bax EQ

    Frequency Response +- 0.1dB from 10Hz to 20kHz +- 0.2dB from 1Hz to 80kHz Maximum level >+28dBu Noise floor <-92dBu band limited from 22Hz-22kHz THD+N  <0.002% IMD  <0.003% Crosstalk rejection  >105dB Replacement Fuses USA 500mA fast blow for 120V Europe 250mA fast blow for 240V Input Impedance  25K Ohms Output Impedance  50 Ohms

    0 €HTVA
  • DRAWMER - 1961

    INPUT IMPEDANCES XLR 20KOhm INSERT 47KOhm MAXIMUM INPUT LEVEL +17dB (+21dBu) OUTPUT IMPEDANCES XLR 50 Ohm INSERT 200 Ohm FREQUENCY RESPONSE < 22Hz to 42KHz -1dB CROSSTALK <-80dB @ 10KHz <-75dB @ 20KHz INPUT CMR Better than 40dB (20Hz to 10KHz) OUTPUT BALANCE Better than 40dB (20Hz to 10KHz) NOISE AT UNITY GAIN with flat EQ response switched in...

    0 €HTVA
Résultats 1 - 12 sur 54.