> Egaliseurs & Enhancers

Egaliseurs & Enhancers  Il y a 54 produits.

  • Afficher :
par page
  • EDAX - EQP2-E

    Features Tube and Discrete- Dual Mode- Class A amplifer. 100% Passive filters Pultec Type Plastic conductive potentiometers. Sealed Hi quality rotary switches. Active and Inactive filter switch. All signal routing with sealed relays. Hardwire relay bypass. Full regulated power supply Hi headroom +29 dB. Very low noise. Aluminium machined...

  • Electrodyne - 2511

    Input: Active balanced discrete transistor impedance converter. Output impedance: 150 ohms +/-12 db gain range: Equalize or Attenuate 4 frequencies selectable per band. LF: 40, 100, 250, 500hz. HF: 1.5k, 3k, 5k, 10k. Peak/Shelf function on each band. Shelving at all frequencies, Peaking at 250, 500, 1.5k, 3k and 5k. Distortion: 0.03%typical. Maximum...

  • Elysia - Karacter Rack

    The Coloring BoxDiscrete Class-A Topology Mastering-Grade Saturation Tube-Inspired Distortion Glorious Destruction Color Filter Integrated M/S Matrix Dual Mono/Stereo Link Stepped Controllers Ground Layer Shield Technical Data

  • Elysia - Museq Rack

    The Musical Equalizer100% Discrete Class-A Active Bandpasses with FETs Resonance High & Low Pass Filters Parallel Filter Design Warm Mode Pure Transparency Path Boost/Cut Mode Switchable Filter Quality Stepped & Matched Potentiometers Technical Data

  • Elysia - Nvelope Rack

    The Impulse ShaperDiscrete Class-A Topology Full Range Mode Dual Band Mode EQ Mode Mixed Mode Dual Mono/Stereo Link Auto Gain Stepped Potentiometers Technical Data

  • Elysia - Xfilter Rack

    The Universal Equalizer100% Class-A Topology True Stereo Operation Resonance High & Low Cut Filters Switchable Filter Quality Additional Passive High-Band Stepped Controllers Computer-Selected Potentiometers Special Low Tolerance Capacitors Ground Layer Shield Technical Data

  • EMPIRICAL - ELQ Lil freq

    Freq. Response - 5 Hz to 140 kHz on transformerless inputs and outputs. Transformer Output response is 10 Hz to 110 kHz . Dynamic Range - 120 dB from maximum output (.1% clipping) to minimum output. Greater than 110 dB signal to noise. Distortion Ranges between .00056% and .005% depending on mode and settings. DS section has THD < .005%. DC coupled...

    0 €HTVA
  • Great River - EQ-1NV ONE-CHANNEL EQUALIZER

    EQ-1NV Features One channel, discrete Class-A designMultiple In/Out connections: XLR balanced line in and out; ¼" -10dbV output for 'no-latency' DAW monitoring; TRS ¼” insert patch point for NV Series mic preamp (inserts EQ between NV preamp gain stages)Wide range of input sensitivity from +8dbm to -20dbm with selection between line in and insert patch...

  • Great River - EQ-2NV TWO-CHANNEL EQUALIZER

    EQ-2NV Features Two channel, discrete Class-A design>Multiple In/Out connections: XLR balanced line in and out; ¼" -10dbV output for 'no-latency' DAW monitoring; TRS ¼” insert patch point for NV Series mic preamp (inserts EQ between NV preamp gain stages)>Wide range of input sensitivity from +8dbm to -20dbm with selection between line in and...

  • Great River - MAQ-2NV TWO-CHANNEL MASTERING EQUALIZER

    maq-2NV features Stereo, discrete Class-A design with LC topologyMultiple In/Out connections: XLR balanced line in and out; ¼" -10dbV output for 'no-latency' DAW monitoring; TRS ¼” insert patch pointWide range of input sensitivity from +8dbm to -20dbm with selection between line in and insert patch point4 bands independently enabled with +/-8db...

  • JDK - R24

    Inputs: Balanced XLR and 1/4" parallel jacks Outputs: Transformer Balanced XLR and 1/4" parallel jacks(All measurements with 600 Ohm output load) Power Consumption, Quiescent: 5.06 Watts Bandwidth: +/- 0.5 dB, 20 Hz - 20 kHz THD+N @ 1 kHz, +4 dBu: 0.01% Maximum Level: +23 dBu Signal-to-Noise Ratio: -100 dB EQ Bands: 4 bands, all +/-12 dB Peak/Dip type Q...

    0 €HTVA
  • KUSH AUDIO - Clariphonic MS

    0 €HTVA
Résultats 13 - 24 sur 54.