Frequency Response 1 Hz-100 kHz within 0.2 dB Total Harmonic Distortion 0.003% in audio band Intermodulation Distortion 0.004% IMD60 41 Crosstalk @ 1 kHz -97 dB Noise floor -82 dBu total energy in audio band Max level +26 dBu Nominal operating level +4 dBu Input impedance 12 kohm...
Max Input Level > +28 dBu THD+N @+4dBu 1KHz, unweighted, 22Hz to 22kHz < 0.0048% THD+N @+22dBu 1KHz, unweighted, 22Hz to 22kHz < 0.0026% IMD @ +4dBu < 0.0038% IMD @ +22dBu < 0.0021% Crosstalk rejection > 108dBu @ 1KHz Noise at Unity Gain 22Hz to 22KHz < -86dBu Noise at...
Frequency Response +- 0.1dB from 10Hz to 20kHz +- 0.2dB from 1Hz to 80kHz Maximum level >+28dBu Noise floor <-92dBu band limited from 22Hz-22kHz THD+N <0.002% IMD <0.003% Crosstalk rejection >105dB Replacement Fuses USA 500mA fast blow for 120V Europe 250mA fast blow for 240V Input Impedance 25K Ohms Output Impedance 50 Ohms
Frequency Response: +/-0.25dB from 15Hz to 80kHz Maximum level: > +27dBu Noise floor: < -93dBu band limited from 22Hz-22kHz THD+N: < 0.005% IMD: < 0.007% Crosstalk rejection: > 115dB @1kHz Input Impedance: 20K Ohms Output Impedance: 50 Ohms Replacement Fuses: USA 500mA fast blow for 120V Europe 250mA...
Signal to Noise Ratio A-weighted, 20Hz to 20KHz: < 114dB Signal to Noise Ratio unweighted, 20Hz to 20KHz: < 113dB Dynamic Range A-weighted, 20Hz to 20KHz: < 114dB Dynamic Range unweighted, 20Hz to 20KHz: < 113dB THD+N: THD+N, 1kHz, unweighted, 20Hz to 20kHz, +4dBu out: < 94.5dB (0.00188%)...
Signal to Noise Ratio A-weighted, 20Hz to 20KHz < 114dB Signal to Noise Ratio unweighted, 20Hz to 20KHz < 113dB Dynamic Range A-weighted, 20Hz to 20KHz < 114dB Dynamic Range unweighted, 20Hz to 20KHz < 113dB THD+N THD+N, 1kHz, unweighted, 20Hz to 20kHz, +4dBu out: < 94.5dB (0.00188%) THD+N,...
Frequency Response (Passive Section) +0, -0.1dB from 10Hz to 100kHz Frequency Response (Active Section) +0, -0.1dB from 10Hz to 100kHz Maximum level > +28dBu Noise floor < -94.5dBu 22Hz-22kHz bandwidth THD+N < 0.002% IMD < 0.003% Crosstalk rejection (Passive Section) >124dB...
Input and Output controls: + – 5dB in 0.5dB steps Input Monitor Offset: -2 to +8dB in 0.5dB steps Width control: -4 to +6dB in 0.5dB steps Attenuator accuracy: > 0.01dB THD+Noise in audio band: < 0.0018% IMD 60Hz + 4kHz 4:1 < 0.0025% Crosstalk rejection: Better than 111dB @ 1kHz Headroom: > +27dBu, +23dBu in the matrix under worst case...
Gain Tracking Accuracy: better than 0.05dB for 6 channels THD+N: 0.002% IMD: 0.003% Frequency Response: 1Hz-100kHz -0.1 dB Crosstalk Rejection: >95dB Nominal Input Level: +4dBu or -10dBV Crossover: -3dB @57Hz 18dB/Octave modified Butterworth/Chebyshev Headphone Amp: 0.002% THD+N Headroom: +25 dBu to main outputs Dynamic range : 110dB Maximum level: +25dBu
Gain Tracking Accuracy Better than 0.05dB for 6 channels THD+N 0.002% IMD 0.003% Frequency Response 1Hz-100kHz -0.1dB Crosstalk Rejection >95dB Nominal Input Level +4dBu or -10dBV Crossover -3dB @ 57Hz 18dB/octave modified Butterworth/Chebyshev Dynamic range 110dB Maximum level +25dBu Headphone amp 0.002% THD+N Headroom +25dBu to main outputs Remote...
Input 1 to Selected Line Out and Speakers: Frequency Response: +0, -0.5dB from <10 Hz to >80 kHz THD+N: < 0.0025% @+4dBu IMD (SMPTE): < 0.0025% @ +4dBu Crosstalk rejection: >108dB Noise: < -93 dB, unweighted NOTE: Speaker outs can run at -6dB (factory setting) or unity gain (remove jumpers 3 and 4)...
SUMMING SECTIONFrequency Response Flat within 0.1dB from 10Hz to 50kHz THD+N @ +4dBu 0.0019% IMD 0.0020% Crosstalk Rejection >114dB @ 1kHz Noise floor @ unity gain 22Hz to 22kHz <-90dBu Maximum Input Level +27dBu SELECTED LINE OUTPUTFrequency Response Flat within 0.5dB from 10Hz to 50kHz THD+N @ +4dBu 0.0027% IMD 0.0027% Crosstalk Rejection...