FOUR Microphones A/B/C/D matrix to FOUR external Microphone preamplifiers 1/2/3/4 LOCK each selection combination for comparison Front-panel 1/4" Direct Input with Variable Phase circuit and Ground Lift switch THRU: mirrored output of the Direct Input Low/High range select for Variable Phase all-pass filter Remote Fader jack for manual gain riding...
ALL-TUBE preamplifier audio path using 1 x 12AX7 for gain and 1 x 6922 White FollowerBalanced Transformer Coupled XLR Microphone Input Impedance: 1200 OhmsBalanced XLR Line Input Impedance: 10 kOhmsUnbalanced 1/4" Direct Input Impedance: 10 Meg OhmHi-current drive Direct XLR output Impedance: 50 OhmsSilent conductive plastic INPUT attenuatorMicrophone...
10:1 Limiter and 3:1 Compressor ratios All-tube audio path uses 5751 and 6922 dual triodes Balanced Manley IRON® transformer-coupled XLR Inputs XLR impedance-balanced outputs BYPASS switches and AUTOMUTE with warm-up delay Large illuminated VU meters read Gain Reduction or Output levels STEREO LINK Side-Chain High-Pass Filter Universal internal power...
MANLEY input transformer with nickel laminations potted in mu-metal case. 3K Ohm input Z PHASE REVERSE switch for balanced XLR input Alternate transformerless 1/4" HI-Z (5K Ohm) input BYPASS switch & AUTO-MUTE w/warmup delay Silent conductive plastic BOOST & CUT controls Sealed gold-contact Greyhill frequency select switches Vacuum Tubes: 1 x...
Vacuum Tubes: 4 x 12AX7WA dual triodes Balanced Transformer Coupled XLR Microphone Input Impedance: 1250 Ohms Unbalanced 1/4" Direct Input Impedance: 10 Meg Ohm Maximum Input Mic input (Low Gain Setting): -5 dBu or 435mV RMS @ 0.5% THD Maximum Input Mic input (High Gain Setting): -25 dBu or 44mV RMS @ 0.5% THD Maximum Input Direct input (Low Gain...
Ins & Outs Balanced XLR & 1/4" (accepts unbalanced) Level +4 dBu nominal, internal switches for -10 operation Bypass Switch bypasses EQ & tube circuits (not hardwire) 44 Frequencies (roughly 1/4 octave spacing) Frequency Range: 22 Hz to 27 kHz EQ Boost/Cut Range : 20 dB boost, 20 dB cut Nominal Q range: 1.5 to 3 (uniquely active in shelf...
Ins & Outs Balanced XLR & 1/4" (accepts unbalanced) Level +4 dBu nominal, internal switches for -10 operation Bypass Switch bypasses EQ & tube circuits (not hardwire) 44 Frequencies (roughly 1/4 octave spacing) Frequency Range: 22 Hz to 27 kHz EQ Boost/Cut Range: Maximum 11dB boost or cut Nominal Q range: 1.5 to 3 (uniquely active in shelf...
MANLEY input transformer with pure nickel laminations potted in mu-metal case. 3K Ohm input Z PHASE REVERSE switch for balanced XLR input Alternate transformerless 1/4" HI-Z (5K Ohm) input BYPASS switch & AUTO-MUTE w/warmup delay Silent conductive plastic PEAK & SHELF controls Sealed gold-contact Greyhill frequency select switches Hi-current drive...
MANLEY input transformer with pure nickel laminations potted in mu-metal case. 3K Ohm input Z PHASE REVERSE switch for balanced XLR input Alternate transformerless 1/4" HI-Z (5K Ohm) input BYPASS switch & AUTO-MUTE w/warmup delay Silent conductive plastic PEAK & SHELF controls Sealed gold-contact Greyhill frequency select switches Hi-current drive...
Features: Manley IRON® input transformers 4 x hand-matched 6BA6 vacuum tubes Balanced XLR inputs & outputs Manley HIP function raises soft dynamics without squashing louder passages High Voltage Switched Mode Power Supply custom designed for our vacuum tube audio circuits Controls and Switches: INPUT Level Preset 3-way switches -3dB, 0, +3dB...
All-Tube triode design 12AT7 (2011 build. Previous versions used 12AX7 and 6072.) -10 dB switchable pad Frequency response: 10Hz-30KHz Sensitivity: 17mV/Pa Noise typically -120dB EIN Max SPL: 150dB Actual output impedance 200 Ohms Weight: 2.25 lbs (mic) Weight: 2.5 lbs (PSU) Size: 4.5" x 9.7" x 4.5" (mic) Size: 5" x 8.2" x 3.4" (PSU) Shipping weight: 15...
All-Tube triode design 12AT7 (2011 build. Previous versions used 12AX7 and 6072.) -10 dB switchable pad Frequency response: 10Hz-30KHz Sensitivity: 17mV/Pa Noise typically -120dB EIN Max SPL: 150dB Actual output impedance 200 Ohms Weight: 2.25 lbs (mic) Weight: 2.5 lbs (PSU) Size: 4.5" x 9.7" x 4.5" (mic) Size: 5" x 8.2" x 3.4" (PSU) Shipping weight: 15...