Focusrite

  • Afficher :
  • Mic Inputs Frequency response at minimum gain (0dB): -0.35dB at 20Hz and -3dB at 122kHzFrequency response at maximum gain (60dB): -2.5dB at 20Hz and -3dB 103kHzGain range: 0dB to +60dB in 10dB steps, plus 0dB to +20dB continuously variable trimMaximum headroom: +7.4dBuTHD+N: 0.0009% (measured at 1kHz -20dBu input signal, at 30dB gain setting, with a...

  • Line Gain Range +10dB to +40dB continuously variable Input Impedance >1M Ohm Mic Gain Range 0 to +60dB in 10dB steps Input Impedance Variable as follows: 600 Ohm, 1k4 Ohm, 2k4 Ohm, 6k8 Ohm EIN -128dB with 150 Ohm terminating impedance at 60dB of gain Noise -97dBu THD 0.001%...

  • Mic Inputs Gain range 0 dB to 60 dB in 10 dB steps Input Impedance Variable, 600Ω, 1k4Ω, 2k4Ω, 6k8Ω EIN (equivalent input noise) -126 dB measured at 60 dB of gain with 150 Ohm terminating impedance and 22 Hz / 22 kHz bandpass filter Noise at main output with gain at unity (0 dB) -97 dBu measured with a 22 Hz / 22...

  • Analogue Channel Inputs XLR Mic inputOne XLR and one TRS line inputXLR Instrument input TRS JackExternal ADC input TRS JackTRS jack returnAnalogue Channel Outputs TRS jack sendXLR balanced line outputXLR DI outputTS jack DI throughAnalogue Channel Additional I/O TRS Jack cue mix left inputTRS Jack cue mix right input1/4” TRS Jack headphones outputMic...

  • Front panel, per channel 1/4" instrument input Variable input impedance - Low, ISA 110, Medium, High Input selection - Mic, Line, Instrument 0 - 30 dB/30 - 60 dB gain switch Phantom power switch Phase invert switch 0 - 60 dB gain in 10 dB steps 0 - +20 dB continuously variable trim Variable high-pass filter with on/off...

Résultats 1 - 5 sur 5.