Filtrer les produits

> Interfaces Audio

Interfaces Audio  Il y a 10 produits.

  • Afficher :
  • Audient - iD14

    MICROPHONE PREAMPLIFIER: (measurement includes ADC signal path) LINE GAIN: -10 to 56 dB (-10dB hardwired line pad) PHANTOM POWER: 48V ±4V @ 10mA/Channel (12VDC only)* MIC EIN: <-127.0 dBu CMRR: >80 dB @ 1kHz MAXIMUM INPUT LEVEL: +12...

  • Audient - iD22

    MICROPHONE PREAMPLIFIER:(measured to insert send) MIC GAIN: -10 to +60 dB (-10dB Pad) LINE GAIN: -20 to +40 dB (-10dB Pad) PHANTOM POWER: 48v +/-4v @ 10mA/Channel MIC EIN: <-125dBu CMRR: >80dB @ 1kHz MAXIMUM INPUT LEVEL: +22dBu (+32dBu with Pad) INPUT IMPEDANCE (Mic): >3kΩ Balanced INPUT IMPEDANCE (Line): >10kΩ Balanced FREQUENCY RESPONSE:...

  • Audient - iD4

    MICROPHONE PREAMPLIFIER:(measurement includes ADC signal path) MIC GAIN: 0 to 58 dB  LINE GAIN: -10 to 48 dB (-10dB hardwired line pad) PHANTOM POWER: 48V ±4V @ 10mA/Channel MIC EIN: <-126.0 dBu CMRR: >75 dB @ 1kHz MAXIMUM INPUT LEVEL: +12 dBu (0 dBFS digital Maximum) INPUT IMPEDANCE (Mic): 2.8 kΩ Balanced INPUT IMPEDANCE (Line): >8kΩ Balanced...

  • MILLENNIA - AD-596-DR

    Dynamic Range > 110dB Total Harmonic Distortion + Noise < .0005%, Frequency Response 44.1 kHz 48 kHz 88.2 kHz 96 kHz -0.5 dB @ 5Hz and 21.5kHz -0.5 dB @ 5Hz and 23.4kHz -0.5 dB @ 5hZ and 42.0kHz -0.5 dB @ 5Hz and 46.8kHz Full Scale Output Level   +24 dBu Common Mode Rejection Ratio  -84 dBu @ 1kHz with 0 dBu...

  • MILLENNIA - DA-296

    General 1/3- rack width powder-coated steel case with anodized aluminum front panel, 1 rack unit high Uses IEEE802.af Power-Over-Ethernet (PoE) to eliminate external power supply Green LED PoE indicator Yellow  LED signal present audio level indicator per channel Operating temperature range 0-70 oC 2...

  • MILLENNIA - Dante Option

  • MILLENNIA - HDOE and HROE

    Number of Available Outputs   3 outputs per channel 1 on XLR, 2 on Tascam pinout DB25s Frequency Response   +0 / -3 dB sub 3 Hz to beyond 300 kHz Noise   60 dB Gain, 10 Hz - 30 kHz, Inputs common -133 dB EIN Total Harmonic...

  • MILLENNIA - MADI-DR

  • RUPERT NEVE - RNDI

    Noise: Measured Output, un-weighted, 22Hz-22kHz, source impedance 150 Ohms to 10K Ohms Better than -110dBVInput Impedance Instrument Setting: 2.2 Meg Ohm Speaker Setting: 200k OhmOutput Impedance Less than 40 OhmsFrequency Response +/- 0.25dB from 25Hz – 44kHz +/- 1dB from 12.5Hz – 63kHz -3dBu @ 92kHzMaximum Input Level Instrument = +21dBu TypicalSpeaker...

  • RUPERT NEVE - RNHP

    Maximum Input Levels "A" XLR I/P: +22.8 dBu @1kHz "B" RCA I/P: +14.7dBu @1kHz, "C" 3.5mm I/P: +3.3dBu @1kHz Output Power: As measured with typical headphones, Z=44 Ω: 3.617 VAC RMS @1kHz = 300mW RMS 16 Ω typical Load: 1.933 VAC RMS @1kHz = 230mW RMS 150 Ω typical Load: 5.108 VAC RMS @1kHz = 175mW RMS Output Impedance .08 Ω @ 1KHz, 16-150 Ω load, 0dBu...

Résultats 1 - 10 sur 10.