Agrandir l'image
| MICROPHONE PREAMPLIFIER: (measurement includes ADC signal path) |
|
| MIC GAIN: | 0 to 58 dB |
| LINE GAIN: | -10 to 48 dB (-10dB hardwired line pad) |
| PHANTOM POWER: | 48V ±4V @ 10mA/Channel |
| MIC EIN: | <-126.0 dBu |
| CMRR: | >75 dB @ 1kHz |
| MAXIMUM INPUT LEVEL: | +12 dBu (0 dBFS digital Maximum) |
| INPUT IMPEDANCE (Mic): | 2.8 kΩ Balanced |
| INPUT IMPEDANCE (Line): | >8kΩ Balanced |
| FREQUENCY RESPONSE: | ±0.1 dB 20Hz to 22kHz @ min. gain ±1.0 dB 20Hz to 22kHz @ max. gain |
| CROSSTALK: | <-91 dBu |
| THD+N @ 0dBu (1kHz): | 0.0015% (-96.5dBu) |
| SNR: | 96 dB un-weighted, 99 dB A-weighted |
| XLR Combi Female | Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield) |
| 1/4" TRS Jack | Tip (Hot), Ring (Cold) & Sleeve (Shield) |
| D.I (Channel 1): | |
| D.I GAIN: | -5 to 35 dB |
| MAXIMUM INPUT LEVEL: | +8 dBu (0.6% THD typical) |
| INPUT IMPEDANCE: | >500kΩ Unbalanced |
| FREQUENCY RESPONSE: | ±0.1 dB 20Hz to 22kHz |
| THD+N @ 0dBu (1kHz): | <0.1% all musical 2nd and 3rd harmonics
Typically 0.05% at 0dBu |
| SNR: | 87 dB un-weighted, 90dB A-weighted |
| 1/4” JACK: | TIP (Hot) & SLEEVE (Shield) |
| ANALOGUE TO DIGITAL CONVERTER (ADC 1 & 2): (measured sans microphone preamplifier under AES-17) |
|
| MAXIMUM INPUT LEVEL: | +12 dBu (0 dBFS digital maximum) |
| DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
| FREQUENCY RESPONSE: | ±0.1 dB 10Hz to Fs/2 (flat to nyquist) |
| CROSSTALK: | -100 dBu @ 1kHz & 10kHz |
| THD+N @ -1dBFS (1kHz): | <0.001% (-100 dB) |
| THD+N @ -6dBFS (1kHz): | <0.0011% (-99.1 dB) |
| DYNAMIC RANGE: | 112 dB un-weighted 114 dB A-weighted |
| DIGITAL TO ANALOGUE CONVERTER (DAC 1&2): (measured under AES-17 at line outputs 1&2) |
|
| MAXIMUM OUTPUT LEVEL: | +12 dBu (0 dBFS digital maximum) |
| DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
| OUTPUT IMPEDANCE | <100Ω |
| FREQUENCY RESPONSE: | ±0.1 dB 10Hz to Fs/2 (flat to nyquist) |
| CROSSTALK: | <-104 dBu @ 1kHz & 10kHz |
| THD+N @ -1dBFS (1kHz): | <0.0015% (-96.5 dB) |
| DYNAMIC RANGE: | 112 dB un-weighted 115 dB A-weighted |
| 1/4" TRS Jack | Tip (Hot), Ring (Cold) & Sleeve (Shield) |
| DUAL HEADPHONE OUTPUT: | |
| MAXIMUM OUTPUT LEVEL: | +12 dBu (0dBFS digital maximum) |
| DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
| VOLTAGE GAIN: | +6 dB (optimised for loudness) |
| OUTPUT IMPEDANCE: | <30 Ω Balanced |
| FREQUENCY RESPONSE: | ±1.0 dB 10Hz to Fs/2 (load dependant) |
| CROSSTALK: | -98 dBu @ 1kHz & 10kHz |
| THD+N @ -1dBFS (1kHz): | <0.0012% (-98.4 dB) |
| DYNAMIC RANGE: | 106 dB un-weighted 108 dB A-weighted |
| MAX LEVEL INTO 30ohms: | +3 dBu, 0.008% THD+N, Power: 80mW |
| MAX LEVEL INTO 60ohms: | +6 dBu, 0.005% THD+N, Power: 80mW |
| MAX LEVEL INTO 600ohms: | +12 dBu, 0.0025% THD+N, Power: 31mW |
| 1/4” TRS JACK: | TIP (Left), RING (Right) & SLEEVE (Shield) |
| 1/8” MINI JACK: | TIP (Left), RING (Right) & SLEEVE (Shield) |
| USB 2.0 HIGH SPEED: | |
| BUS POWER: | 500mA @5V System Limit 420mA @5V Maximum (No 48V) |
| No. of INPUT CHANNELS: | 2 (2 Analogue) |
| No. of OUTPUT CHANNELS: | 2 (2 Analogue) |
| DSP MIXER LATENCY: | ROUND TRIP (in-to-out)
44.1kHz 1.583ms |
| COMPATIBILITY: iD4 supports the following operating systems: |
|
|
|
| * To use iD4 with an iOS device a camera adapter kit and a powered USB 2.0 hub is required. |
|
| POWER SUPPLY: | |
| USB2.0 Powered (2.5 Watts Maximum)* |
* iD4 features our class leading converters and class-A mic pre. We've optimised all circuitry so that we can supply true 48v phantom power to a single Audient mic pre without compromise. Your microphones will thank you when they get enough voltage.
AUDI63794F
Nouveau
Audient - iD4
iD4 delivers the audio performance of a large format console in a portable desktop package enabling you to record your vocals and guitar simultaneously. Providing one renowned Audient console mic pre, class-leading converter technology, dual headphone outputs, console style monitor control, JFET D.I and our virtual scroll wheel technology 'ScrollControl', iD4 is a professional but affordable solution for your home studio or for when you’re on the road.
At a glance
- 2-in/2-out USB Audio Interface
- 1 x Class-A Audient Console Mic Preamplifier
- 1 x Discrete JFET Instrument Input
- High Performance Converters
- iD ScrollControl Mode
- Zero Latency Monitoring with Monitor Mix & Pan
- Main Speaker Output
- Class-AB Headphone Amplifier with Dual Outputs
- Monitor Control Functionality
- USB2.0 Bus Powered
- 24bit/96khz
- All-Metal Enclosure
- Windows, macOS and iOS compatible
PRISTINE CONVERTER TECHNOLOGY
Brilliance on the inside enables brilliance on the outsideiD4 provides you with high performance AD-DA converters. Quality in the analogue stages of design comes from years of experience as analogue console designers, and when coupled with outstanding converter technology it enables you to hear audio as it’s supposed to sound. The importance of converters should never be underestimated. Experience audio the Audient way.
THE REVOLUTIONARY ‘SCROLLCONTROL’
Simply scroll to controlWith a touch of a button iD4’s volume encoder becomes a virtual scroll wheel, enabling you to adjust DAW hosts, plug-in parameters and even scroll through your iTunes library - just like you’re adjusting a piece of hardware. Wherever your mouse pointer hovers, the iD knob can scroll to control! And when you're not using ScrollControl, pressing iD4’s volume encoder activates DIM, enabling you to quickly reduce the playback volume.
PLUG AND PLAY
Plug in and be inspirediD4 has a harmonically rich JFET D.I input. Designed to replicate the input stage of a classic valve amplifier, you can plug your guitar, bass, keyboard or drum machine straight in and start recording instantly. Get professional quality recordings from the start and take your track to the next level.
MONITOR PAN
Headphone mixes with ClarityRecording an acoustic guitar and vocal? iD4’s Monitor Pan feature enables you to pan both the mic pre input and D.I input from left to right, making it easy for you to create a balanced headphone mix that suits you. Quickly plug in, set up a headphone mix and starting tracking instantly, perfect for singer songwriters & producers on the go!
Features And Specs
| MICROPHONE PREAMPLIFIER: (measurement includes ADC signal path) |
|
| MIC GAIN: | 0 to 58 dB |
| LINE GAIN: | -10 to 48 dB (-10dB hardwired line pad) |
| PHANTOM POWER: | 48V ±4V @ 10mA/Channel |
| MIC EIN: | <-126.0 dBu |
| CMRR: | >75 dB @ 1kHz |
| MAXIMUM INPUT LEVEL: | +12 dBu (0 dBFS digital Maximum) |
| INPUT IMPEDANCE (Mic): | 2.8 kΩ Balanced |
| INPUT IMPEDANCE (Line): | >8kΩ Balanced |
| FREQUENCY RESPONSE: | ±0.1 dB 20Hz to 22kHz @ min. gain ±1.0 dB 20Hz to 22kHz @ max. gain |
| CROSSTALK: | <-91 dBu |
| THD+N @ 0dBu (1kHz): | 0.0015% (-96.5dBu) |
| SNR: | 96 dB un-weighted, 99 dB A-weighted |
| XLR Combi Female | Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield) |
| 1/4" TRS Jack | Tip (Hot), Ring (Cold) & Sleeve (Shield) |
| D.I (Channel 1): | |
| D.I GAIN: | -5 to 35 dB |
| MAXIMUM INPUT LEVEL: | +8 dBu (0.6% THD typical) |
| INPUT IMPEDANCE: | >500kΩ Unbalanced |
| FREQUENCY RESPONSE: | ±0.1 dB 20Hz to 22kHz |
| THD+N @ 0dBu (1kHz): | <0.1% all musical 2nd and 3rd harmonics
Typically 0.05% at 0dBu |
| SNR: | 87 dB un-weighted, 90dB A-weighted |
| 1/4” JACK: | TIP (Hot) & SLEEVE (Shield) |
| ANALOGUE TO DIGITAL CONVERTER (ADC 1 & 2): (measured sans microphone preamplifier under AES-17) |
|
| MAXIMUM INPUT LEVEL: | +12 dBu (0 dBFS digital maximum) |
| DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
| FREQUENCY RESPONSE: | ±0.1 dB 10Hz to Fs/2 (flat to nyquist) |
| CROSSTALK: | -100 dBu @ 1kHz & 10kHz |
| THD+N @ -1dBFS (1kHz): | <0.001% (-100 dB) |
| THD+N @ -6dBFS (1kHz): | <0.0011% (-99.1 dB) |
| DYNAMIC RANGE: | 112 dB un-weighted 114 dB A-weighted |
| DIGITAL TO ANALOGUE CONVERTER (DAC 1&2): (measured under AES-17 at line outputs 1&2) |
|
| MAXIMUM OUTPUT LEVEL: | +12 dBu (0 dBFS digital maximum) |
| DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
| OUTPUT IMPEDANCE | <100Ω |
| FREQUENCY RESPONSE: | ±0.1 dB 10Hz to Fs/2 (flat to nyquist) |
| CROSSTALK: | <-104 dBu @ 1kHz & 10kHz |
| THD+N @ -1dBFS (1kHz): | <0.0015% (-96.5 dB) |
| DYNAMIC RANGE: | 112 dB un-weighted 115 dB A-weighted |
| 1/4" TRS Jack | Tip (Hot), Ring (Cold) & Sleeve (Shield) |
| DUAL HEADPHONE OUTPUT: | |
| MAXIMUM OUTPUT LEVEL: | +12 dBu (0dBFS digital maximum) |
| DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
| VOLTAGE GAIN: | +6 dB (optimised for loudness) |
| OUTPUT IMPEDANCE: | <30 Ω Balanced |
| FREQUENCY RESPONSE: | ±1.0 dB 10Hz to Fs/2 (load dependant) |
| CROSSTALK: | -98 dBu @ 1kHz & 10kHz |
| THD+N @ -1dBFS (1kHz): | <0.0012% (-98.4 dB) |
| DYNAMIC RANGE: | 106 dB un-weighted 108 dB A-weighted |
| MAX LEVEL INTO 30ohms: | +3 dBu, 0.008% THD+N, Power: 80mW |
| MAX LEVEL INTO 60ohms: | +6 dBu, 0.005% THD+N, Power: 80mW |
| MAX LEVEL INTO 600ohms: | +12 dBu, 0.0025% THD+N, Power: 31mW |
| 1/4” TRS JACK: | TIP (Left), RING (Right) & SLEEVE (Shield) |
| 1/8” MINI JACK: | TIP (Left), RING (Right) & SLEEVE (Shield) |
| USB 2.0 HIGH SPEED: | |
| BUS POWER: | 500mA @5V System Limit 420mA @5V Maximum (No 48V) |
| No. of INPUT CHANNELS: | 2 (2 Analogue) |
| No. of OUTPUT CHANNELS: | 2 (2 Analogue) |
| DSP MIXER LATENCY: | ROUND TRIP (in-to-out)
44.1kHz 1.583ms |
| COMPATIBILITY: iD4 supports the following operating systems: |
|
|
|
| * To use iD4 with an iOS device a camera adapter kit and a powered USB 2.0 hub is required. |
|
| POWER SUPPLY: | |
| USB2.0 Powered (2.5 Watts Maximum)* |
* iD4 features our class leading converters and class-A mic pre. We've optimised all circuitry so that we can supply true 48v phantom power to a single Audient mic pre without compromise. Your microphones will thank you when they get enough voltage.
