Agrandir l'image
General
| 1/3- rack width powder-coated steel case with anodized aluminum front panel, 1 rack unit high |
| Uses IEEE802.af Power-Over-Ethernet (PoE) to eliminate external power supply |
| Green LED PoE indicator |
| Yellow LED signal present audio level indicator per channel |
| Operating temperature range 0-70 oC |
| 2 channel receiving device – Dante network to analog output |
| 6.5 watts (PoE class 3 compliant) |
Digital
| Dante digital audio |
| 2 Receive flows - unicast or multicast |
| 2ms minimum latency |
| 100Mb LAN interface with EtherCon RJ45 |
| Green LED for Link active |
| Green LED Digital lock) |
| 16/24 PCM bit data |
| 44.1K, 48K, 88.2K, 96K Sample rates |
Audio
| 2 channel output male XLR balanced and 3 pin phoenix connectors |
| 1/4” headphone jack |
| 1/8” headphone jack |
| Headphone output Impedance 150 ohm |
| Headphone level control |
| Switch selectable output ranges -10dBV and +4dBu |
| Main output impedance 50 Ohm |
| Max output +22dBu |
| THD+N 0.006% |
MILL4857A3
Nouveau
MILLENNIA - DA-296
Dante to High Resolution Analog
Millennia’s Gōzowta converts from Dante audio over Ethernet to high resolution analog at sample rates up to 96 kHz.
The DA-296 connects any two channels of Dante to your analog gear. Power amps, stage monitor systems, powered speakers and more.
The Gōzowta also has 1/4 and 1/8 inch headphone jacks with a level control so it can be used as part of a personal monitor system or for trouble shooting Dante audio streams.
Outputs include balanced XLR and Phoenix-style output connectors. Power is supplied by the Ethernet cable from PoE (power over Ethernet) enabled switches or in-line PoE injectors.
There is a -10dBV/+4dBu output reference level switch to accommodate most analog equipment
Housed in a rugged 1/3 rack width chassis, the Gōzowta is the same size as Millennia’s portable preamp series. It can also be bolted to a Mid Atlantic rack tray.
Features And Specs
General
| 1/3- rack width powder-coated steel case with anodized aluminum front panel, 1 rack unit high |
| Uses IEEE802.af Power-Over-Ethernet (PoE) to eliminate external power supply |
| Green LED PoE indicator |
| Yellow LED signal present audio level indicator per channel |
| Operating temperature range 0-70 oC |
| 2 channel receiving device – Dante network to analog output |
| 6.5 watts (PoE class 3 compliant) |
Digital
| Dante digital audio |
| 2 Receive flows - unicast or multicast |
| 2ms minimum latency |
| 100Mb LAN interface with EtherCon RJ45 |
| Green LED for Link active |
| Green LED Digital lock) |
| 16/24 PCM bit data |
| 44.1K, 48K, 88.2K, 96K Sample rates |
Audio
| 2 channel output male XLR balanced and 3 pin phoenix connectors |
| 1/4” headphone jack |
| 1/8” headphone jack |
| Headphone output Impedance 150 ohm |
| Headphone level control |
| Switch selectable output ranges -10dBV and +4dBu |
| Main output impedance 50 Ohm |
| Max output +22dBu |
| THD+N 0.006% |
