Charter Oak - S600 Agrandir l'image
ACOUSTIC OPERATING PRINCIPALPressure Gradient
DIAPHRAGMSingle 1.00" 6 micron thick gold sputtered Mylar (side terminated)
FREQUENCY RESPONSE20Hz-18kHz
SENSITIVITY13mV/Pa 0dB=1V/Pa@1kHz
POLAR PATTERNCardioid
IMPEDANCE< 200 Ohms
RECOMMENDED LOAD> 200 Ohms
EQUIVALENT INPUT NOISE22dB A weighted IEC651
MAXIMUM SOUND PRESSURE LEVEL128dB for 0.5% total harmonic distortion @ 1000Hz
POWER REQUIREMENTSCustom supply 115V or 230V operation with IEC type 2 AC Cable

Plus de détails

CHARCFAAB4

Nouveau

Charter Oak - S600

Charter Oak

The CharterOak Acoustic Devices S600 is a front address vacuum tube condenser microphone. Delivered in sequentially numbered pairs with a lockable fight case, dual power supply, and two shock mounts and is extremely well suited for stereo recording.

The S600, like all CharterOak products, features extremely rigid construction and a clean and simple electronic design.

The CharterOak S600 uses a custom made side terminated 1.00" gold sputtered Mylar capsule and custom made output transformer. Its rich and particularly non-sibilant eq make it a perfect choice when used as a stereo overhead pair on the drum kit. The result is clean and rich cymbals with lots of sustain while picking up all of the transient peaks of the snare and tom toms.

The extended bass frequency response of the S600 makes a single S600 a perfect choice for recording bass guitar and its particularly smooth treble response makes it a perfect choice for recording bright electric guitars.

It is hard to imagine a more versatile tool in the studio than a pair of CharterOak S600 vacuum tube condenser microphones.

The microphones are delivered with a lifetime warranty on all parts and labor and easy access to factory technical support.

Features And Specs

ACOUSTIC OPERATING PRINCIPALPressure Gradient
DIAPHRAGMSingle 1.00" 6 micron thick gold sputtered Mylar (side terminated)
FREQUENCY RESPONSE20Hz-18kHz
SENSITIVITY13mV/Pa 0dB=1V/Pa@1kHz
POLAR PATTERNCardioid
IMPEDANCE< 200 Ohms
RECOMMENDED LOAD> 200 Ohms
EQUIVALENT INPUT NOISE22dB A weighted IEC651
MAXIMUM SOUND PRESSURE LEVEL128dB for 0.5% total harmonic distortion @ 1000Hz
POWER REQUIREMENTSCustom supply 115V or 230V operation with IEC type 2 AC Cable

Commander

Charter Oak - S600

Charter Oak - S600

Veuillez patientez...

Pour le moment, M2M Pro a choisi la relation directe avec ses clients.
Les ventes, demandes d'offres et prix... se font via ce formulaire.
N'hésitez pas à prendre contact avec nous pour toute autre question.












* Champ requis