Agrandir l'image
| Element: | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern: | Cardioid |
| Frequency Response: | 20-20,000 Hz |
| Low Frequency Roll Off: | 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity: | -34 dB (19.9 mV) re 1V at 1 Pa |
| Impedance: | 250 ohms |
| Maximum Input Sound Level: | 146 dB SPL, 1 kHz at 1% T.H.D.; 156 dB SPL, with 10 dB pad (nominal) |
| Dynamic Range: | 132 dB, 1 kHz at Max SPL |
| Signal to Noise Ratio: | 80 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements: | 48V DC, 3.0 mA typical |
| Weight: | 119 g (4.2 oz) |
| Dimensions: | 144.0 mm (5.67") long, 21.0 mm (0.83") maximum body diameter |
| Output Connector: | Integral 3-pin XLRM-type |
| Accessories: | AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case |
AUDIOT439W
Nouveau
Audio Technica - AT4021
Ideal for critical studio and live applications, the low-profile AT4021 offers a flat, extended frequency response, high maximum SPL and wide dynamic range. Its low self-noise is perfectly suited for the most sophisticated recording equipment. Its low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer. The microphone offers outstanding reproduction of low-frequency sounds.
- Outstanding performance and rugged construction
- High SPL handling and wide dynamic range
- Flat, extended frequency response
- Switchable 80 Hz hi-pass filter and 10 dB pad
- High front-to-back rejection ratio - cardioid polar pattern improves isolation of desired sound source
- Low self noise perfectly suited for digital recording equipment
- Exceptional reproduction of low frequency sounds
- Low-mass element for superb transient response
Features And Specs
| Element: | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern: | Cardioid |
| Frequency Response: | 20-20,000 Hz |
| Low Frequency Roll Off: | 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity: | -34 dB (19.9 mV) re 1V at 1 Pa |
| Impedance: | 250 ohms |
| Maximum Input Sound Level: | 146 dB SPL, 1 kHz at 1% T.H.D.; 156 dB SPL, with 10 dB pad (nominal) |
| Dynamic Range: | 132 dB, 1 kHz at Max SPL |
| Signal to Noise Ratio: | 80 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements: | 48V DC, 3.0 mA typical |
| Weight: | 119 g (4.2 oz) |
| Dimensions: | 144.0 mm (5.67") long, 21.0 mm (0.83") maximum body diameter |
| Output Connector: | Integral 3-pin XLRM-type |
| Accessories: | AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case |
