Capsule Type: | Hand-Crafted True Condenser |
Diaphragm: | 35mm Gold/Mylar |
Directional Pattern: | Cardioid |
Frequency range: | 20 Hz - 20 kHz |
Impedance: | 200 Ohms |
Sensitivity: | 35.48 mV/Pa (-29 dB) |
Max SPL: | 135/145 dB (0/-10 dB pad) (0.5% THD @ 1kHz) |
Signal to Noise Ratio: | 75 dB |
Self Noise: | 19 dB(A) |
Pass Filter Switch: | 150 Hz |
Preattenuation Pad: | -10 dB |
Power Requirement: | Dedicated PSU (included) |
Weight (mic): | 1224g / 43.18oz |
Weight (PSU): | 1691g / 59.65oz |
Tube complement: | 1x 12AX7/ECC83, 1x 12AU7/ECC82 |
Connector: | XLR3F from PSU |
SEELEC639J
Nouveau
Date de disponibilité:
It's not just large in stature - it's HUGE in sound.
The Gemini II dual valve microphone is a no-holds-barred piece of microphone history. The dual valve design means pure valve warmth from the 12AX7 input valve, coupled with a 12AU7 valve on the output stage. The result is an incredibly large, detailed, and intimate sound – reminiscent of the classic valve microphones from decades ago, but with a thoroughly modern twist.
The Gemini II ready for piano at the San Francisco Conservatory of Music's Technology and Applied Composition program. DUAL-TUBE DESIGN
Most microphones use a transformer to optimize the mic's output impedance and couple the mic to the mic preamplifier. With the Gemini II, this optimization is accomplished with a second vacuum tube, negating any high-frequency rolloff typically incurred with a transformer.
This provides the Gemini II with a sparkling, pristine high-end typically only found in the most expensive solid-state microphones, while maintaining the rich, thick tonality of a tube mic.
Not just for vocals, the bass cut filter and -10dB pad make the Gemini useful for loud and heavy sources like drum room mics and booming timpani.
The Gemini II comes packaged in a wooden presentation box next to its custom shockmount and robust power supply, all within a secure and solid flight case.
Capsule Type: | Hand-Crafted True Condenser |
Diaphragm: | 35mm Gold/Mylar |
Directional Pattern: | Cardioid |
Frequency range: | 20 Hz - 20 kHz |
Impedance: | 200 Ohms |
Sensitivity: | 35.48 mV/Pa (-29 dB) |
Max SPL: | 135/145 dB (0/-10 dB pad) (0.5% THD @ 1kHz) |
Signal to Noise Ratio: | 75 dB |
Self Noise: | 19 dB(A) |
Pass Filter Switch: | 150 Hz |
Preattenuation Pad: | -10 dB |
Power Requirement: | Dedicated PSU (included) |
Weight (mic): | 1224g / 43.18oz |
Weight (PSU): | 1691g / 59.65oz |
Tube complement: | 1x 12AX7/ECC83, 1x 12AU7/ECC82 |
Connector: | XLR3F from PSU |
sE Electonics - GEMINI II
0 €