Agrandir l'image
| Polar pattern | cardioid |
| Acoustical operating principle | Pressure gradient transducer |
| Frequency range | 40 ... 18000 Hz |
| Sensitivity at 1 kHz | 28 mV / Pa |
| Rated impedance | 200 Ω |
| Equivalent loudness level due to inherent noise | |
| CCIR 468-4 (qps) | 24 dB |
| DIN EN 60651 | 13 dB - A |
| Signal-to-noise ratio (re 1 Pa at 1 kHz) | |
| CCIR-weighted | 70 dB |
| A-weighted | 81 dB |
| Max. SPL for THD ≤ 0,5 % | 119 dB |
| Total dynamic range of the microphone amplifier | 106 dB |
| DC power supply | 120 V - |
| Anode current | 1 mA - |
| Heater voltage | 5,8 V - |
| Heater current | 200 mA - |
| Tube | EF 86 |
| Output connector | 7- pin Tuchel C 70 / A |
| Weight | 400 g |
| Dimensions (L x Ø ) | 185 x 43 mm |
MICRBBEEE5
Nouveau
Date de disponibilité:
The M 990 is renowned for its high sensitivity and excellent signal-to-noise ratio. It combines modern large diaphragm capsule technology with the typical full-bodied sound of tube microphones that are preferred by vocalists and soloists. The M 990 vacuum tube condenser microphone is well-suited for difficult radio play productions as well as a supporting microphone for orchestra recordings.
The new pressure gradient transducer of the M 990 uses a large diameter gold-plated plastic diaphragm. The vacuum tube preamplifier is equipped with a pentode working as a triode selected for its sonic characteristics. The N 920.1 power supply provides the operating voltage for the vacuum tube condenser microphone. It can be powered from AC mains with a primary voltage of 115 or 230 volts / 50 or 60 Hz.
For cable lengths over 50 meters it is recommended to have your service provider set the heater voltage of the power supply to 5.8 volts. The N 920.1 is equipped with an on/off-switch, a 7-pin Tuchel connector that powers the microphone and a 3-pin XLR connector with integrated line voltage selector.
The M 990 is packed in a wooden case and comes with power supply , connection cable C 92.1 and elastic suspension EA 92. The microphone is available in a dark bronze finish.
| Polar pattern | cardioid |
| Acoustical operating principle | Pressure gradient transducer |
| Frequency range | 40 ... 18000 Hz |
| Sensitivity at 1 kHz | 28 mV / Pa |
| Rated impedance | 200 Ω |
| Equivalent loudness level due to inherent noise | |
| CCIR 468-4 (qps) | 24 dB |
| DIN EN 60651 | 13 dB - A |
| Signal-to-noise ratio (re 1 Pa at 1 kHz) | |
| CCIR-weighted | 70 dB |
| A-weighted | 81 dB |
| Max. SPL for THD ≤ 0,5 % | 119 dB |
| Total dynamic range of the microphone amplifier | 106 dB |
| DC power supply | 120 V - |
| Anode current | 1 mA - |
| Heater voltage | 5,8 V - |
| Heater current | 200 mA - |
| Tube | EF 86 |
| Output connector | 7- pin Tuchel C 70 / A |
| Weight | 400 g |
| Dimensions (L x Ø ) | 185 x 43 mm |
Microtech - M990
