Agrandir l'image
| Transducer Type : | Condenser, Pressure Gradient |
| Polar Pattern : | Cardioid |
| Frequency Response : | 20Hz – 20KHz |
| Sensitivity : | 20.0mV/Pa at 1kHz (1Pa = 94dB SPL) |
| Output Impedance : | 150Ω |
| Rated Load Impedance : | >1 kΩ |
| Maximum SPL : | 140 dB SPL (2.5kΩ, 0.5% THD) |
| S/N Ratio : | 86 dB–A (IEC 651) |
| Noise Level : | 9.0 dB–A (IEC651) |
| Dynamic Range : | 131 dB (@2.5kΩ) |
| Power Requirement : | +48V DC Phantom Power (IEC 268–15) |
| Weight : | 520g |
| Dimensions : | 235mm x 50mm x 30mm |
BLUEBL751M
Nouveau
BLUE - Blueberry
The Blueberry imparts the commanding, intimate presence demanded from the world's best vocal microphones.
With shimmering, detailed highs, neutral midrange, and minimized proximity effect (a bass boost inherent in all unidirectional mics), the Blueberry excels at delivering a vocal right to the front of the mix where it belongs.
The Blueberry is perfect for contemporary pop and rap applications because the bottom has been “scooped” out for big compression on slick vocal tracks and is ideally suited for deep limiting with your favorite plug-in or external compressor. Acoustic guitar, hand percussion, drums, and other critical high-end sources also shine in front of the Blueberry.
Features And Specs
| Transducer Type : | Condenser, Pressure Gradient |
| Polar Pattern : | Cardioid |
| Frequency Response : | 20Hz – 20KHz |
| Sensitivity : | 20.0mV/Pa at 1kHz (1Pa = 94dB SPL) |
| Output Impedance : | 150Ω |
| Rated Load Impedance : | >1 kΩ |
| Maximum SPL : | 140 dB SPL (2.5kΩ, 0.5% THD) |
| S/N Ratio : | 86 dB–A (IEC 651) |
| Noise Level : | 9.0 dB–A (IEC651) |
| Dynamic Range : | 131 dB (@2.5kΩ) |
| Power Requirement : | +48V DC Phantom Power (IEC 268–15) |
| Weight : | 520g |
| Dimensions : | 235mm x 50mm x 30mm |
