Gain (microphone): | +15.5 to +70dB or +6dB (INP ATTEN mode) |
Gain (direct input): | -4 to +50dB or -14dB (INP ATTEN mode) |
Frequency Response (gain=40 dB): | 1.5 Hz to 500 kHz (+0/-3 dB) |
Maximum Output Level: | +31 dBu (+27 dBu in INP ATTEN mode) |
Maximum Input Level: | +25 dBu (+25 dBu in INP ATTEN mode) |
Input Impedance (microphone): | 10 Kohms |
Input Impedance (direct input): | 2.5 Mohms |
Noise (Rs=0 Ohms): | -132 dB e.i.n. |
Slew Rate: | > 40 V/uS |
CMRR (CMV=+10 dBu): | 85 dB |
THD (+26 dBu, 100 kOhm): | .0008% |
Power Requirements: | 115/230VAC, 50/60 Hz, 9 Watts |
Knob extension: | 0.6 in. (15.3 mm) |
Weight: | 2.3 lbs. (1.1 kg) |
Dimensions: | |
W | = 3. 0 in. (76. 2 mm) |
D = | 6. 0 in. (153 mm) |
H = | 6. 0 in. (253 mm) |
TRUEB0D429
Nouveau
Date de disponibilité:
The True Systems P-SOLORibbon mic preamplifier is a single-channel, analog output, microphone/instrument preamplifier "super-tweaked" for superior performance with vintage and contemporary ribbon mics. With up to 76dB of gain (in 2 ranges), the P-SOLORibbon has an electronically balanced, high-impedance mic input, discrete FET instrument input, 80Hz High Pass Filter, a 4-segment LED bar graph level meter with signal present and overload indicators, plus a continuously variable gain control. The back panel offers both XLR and TRS balanced outputs for easy interface (and zero latency monitoring) in any system.
The P-SOLORibbon is different because it uses a combination of discrete components and integrated circuits in a totally balanced, DC-coupled architecture to achieve extraordinarily clean and transparent performance with ribbon and dynamic microphones. The P-SOLORibbon will reveal more detail than you ever thought possible. (Note: not for active ribbon mics.) The extraordinary TRUE DI offers superior sonic quality comparable only to expensive outboard DI's.
Gain (microphone): | +15.5 to +70dB or +6dB (INP ATTEN mode) |
Gain (direct input): | -4 to +50dB or -14dB (INP ATTEN mode) |
Frequency Response (gain=40 dB): | 1.5 Hz to 500 kHz (+0/-3 dB) |
Maximum Output Level: | +31 dBu (+27 dBu in INP ATTEN mode) |
Maximum Input Level: | +25 dBu (+25 dBu in INP ATTEN mode) |
Input Impedance (microphone): | 10 Kohms |
Input Impedance (direct input): | 2.5 Mohms |
Noise (Rs=0 Ohms): | -132 dB e.i.n. |
Slew Rate: | > 40 V/uS |
CMRR (CMV=+10 dBu): | 85 dB |
THD (+26 dBu, 100 kOhm): | .0008% |
Power Requirements: | 115/230VAC, 50/60 Hz, 9 Watts |
Knob extension: | 0.6 in. (15.3 mm) |
Weight: | 2.3 lbs. (1.1 kg) |
Dimensions: | |
W | = 3. 0 in. (76. 2 mm) |
D = | 6. 0 in. (153 mm) |
H = | 6. 0 in. (253 mm) |
TRUE SYSTEMS - P-Solo Ribbon