Technical Data 3 Band pass filters (BP1 usable as X-Over in position "full left" (disables BP1 Q-factor function!)) Frequency range 20 Hz to 232 kHz Gain, rotary control +/- 10 dB range Q Factort, 11-position switch 0.3 / 0.5 / 0.7 / 1.0 / 1.5 / 2.5 / 4 / 6 / 10as well as LP / HP and Hard-Bypass in position "full right"...
AC input 230 V +/- 10%, 50 Hz Power consumption 70 VA DC output +/- 16 V Output current 2 A @ +/- 16 V Line regulation +/- 0.05% load change Output ripple 0.2 mV +0.05% of output voltage, peak to peak maximum Stability +/- 0.05% for 24 hours after warmup Temperature coefficient +/- 0.015 /°C maximum Transient Response < 55 microseconds for 50% load...
Technical Data Filter Filter bands, 23-position switch 17Hz - 815Hz / 50Hz - 2,3kHz / 125Hz - 6kHz / 350Hz - 18,8kHz / 1,2kHz - 25kHz Gain control with center detent ± 5 dB range (± 10 dB optional ) Custom gain control options: 23-position ELMA switches ± 5.5 dB: resolution of ± 0.5 dB (or ± 11 dB: resolution of ± 1 dB)...
Fully parametric 2x 5-band filter Frequency range from 15 Hz to 20.1 kHz Next Q-factor from 0.4 to 15 Overlapping filter frequencies Wide control range of +/- 10 dB Bypass function for each filter Unique Solo function Separate input level for L and R Central control of the stereo bus Bypass function of all filters Switchable subsonic filter for...
Technical data LB - "low band filter" 20 Hz to 730 Hz MB - "mid band filter" 155 Hz to 3.5 kHz HB - "high band filter" 1.03 kHz to 23.2 kHz Gain, rotary control from center +/- 10 dB control range Q (quality), 11-position switch 0.3 / 0.5 / 0.7 / 1.0 / 1.5 / 2.5 / 4 / 6 / 10 as well as LP and HP "focus", backlit pushbutton frequency alignment "solo",...
Technical Data Gain control max. +10 dB within ¼ dB resolution Impedance potentiometer 10 kOhm - 260 kOhm / (1040 kOhm) „Modus“ - switch function(functions listed clockwise) Balanced input +40 dB, +30 dB, +20 dB, +10 dB, 0 dB, -10 dB off Ein und Ausgänge per Relais gekoppelt Unbalanced input +10 dB, +20 dB, +30 dB PU (turntable) RIAA equalization, 75 /...
Technical Data Gain control, rotary control max. +10 dB (fine adjustment) Impedance, rotary control 10 kOhm - 260 kOhm / (1040 kOhm) Modus - switch function(functions listed clockwise) Balanced input +40 dB, +30 dB, +20 dB, +10 dB, 0 dB, -3 dB off hard-bypass for balanced in- and output Unbalanced input +10 dB, +20 dB, +30 dB Zx4, impedance, backlit...
Technical Data Low band EQ, adjustable frequency 80 Hz / filter bypass / 110 Hz via switch Gain, continously variable +/- 12 dB range via fader Mid band frequency 155 Hz to 3.5 kHz, continously variable Gain, continously variable +/- 10 dB range via rotary control Q-factor, 3-position switch narrow, wide, medium (Q-factor 1.5 / 0.4 / 0.7) High band EQ,...
Technical Data Gain, 41-position rotary control max. +/- 5 dB Phase, continuously variable rotary controlMid indent at 90° phase 10° - 125 ° Phase, 3-position flip switchphase angle range 10° - 125° / 0 / + 180°10° - 125° / bypass phase / 190° - 305° Frequency, 11-position switch 23 Hz / 36 Hz / 48 Hz / 73 Hz / 170 Hz / 230 Hz338 Hz / 470 Hz / 730 Hz / 1...