Agrandir l'image
Technical Data
| Filter | |
| Filter bands, 23-position switch | 17Hz - 815Hz / 50Hz - 2,3kHz / 125Hz - 6kHz / 350Hz - 18,8kHz / 1,2kHz - 25kHz |
| Gain control with center detent | ± 5 dB range (± 10 dB optional ) |
| Custom gain control options: | |
| 23-position ELMA switches | ± 5.5 dB: resolution of ± 0.5 dB (or ± 11 dB: resolution of ± 1 dB) |
| 41-position Alps pot, RK27alps | ± 5 dB: resolution of ± 0.25 dB (or ± 10 dB: resolution of ± 0.5 dB) |
| Optional Q-factor controls: | |
| Q-factor, 11-position | 0.3 / 0.5 / 0.7 / 1.0 / 1.5 / 2.5 / 4 / 6 /10 / 12 / 15 (band 2, 3, 4) |
| Q-factor, 11-position | LP / 0.3 / 0.5 / 0.7 / 1.0 / 1.5 / 2.5 / 4 / 6 / 10 / HP (band 1, 5, serially s. 2016) |
| focus - button | reverse function of gain control |
| solo - switch | solo functions |
| off - switch | enable / disable filter module |
| Input section | |
| phase L - switch | phase reverse left channel |
| mono - switch | sum of L & R channels to check mono compatibility |
| reverse - switch | channel swap L / R |
| 2 gain controls with center detent | ± 5 dB range |
| M/S Section | |
| stereo-width control | continuously variable from 0 to 2 (mono - super wide) with center detent |
| stereo-width toggle switch | compare switch to toggle default stereo width |
| mode selector | choice of input and output modes: St-MS / St-St / off / MS-St / MS-MS |
| M - switch | solo cue of the mid signal |
| S - switch | phase-corrected solo cue of the side signal |
| Input - electronically balanced | |
| Reference input level | +6 dBu |
| Maximum input level | + 28 dBu |
| Input impedance | 47 kOhm |
| Output - electronically balanced | |
| Reference output level | +6 dBu |
| Maximum output level | +30 dBu |
| Output impedance | 50 Ohm |
| Harmonic distortion | THD+N 0,03% (20 Hz - 40 kHz) |
| Input and output connectors | XLR , balanced |
| Frequency range | 20 Hz - 40 kHz, Δ = -0.4 dB |
| Delay time of hard bypass relais | max. 3 ms |
| Power supply | 100-230 V AC, 47-63 Hz, max.110 Watt, optional ext. power supply N2304 |
| Dimensions | 19“ / 5 RU, 483 x 177 x 330 mm (width x height x depth) |
| Weight | 7.85 kg incl. power supply, 6.70 kg without power supply |
| External power supply N2304 | 4.9 kg |
Features
(beginning with SN # 0008)- Phase and channel swap of the inputs
- Mono compatibility switch
- Continuously variable input gain control between -10 dB and +10 dB
- Stereo-width control from 0 to 2 (mono - super wide) plus default stereo toggle switch
- Phase-corrected solo cue function for mid and side signals
- 4 modes of operation for M/S and stereo mastering
- Fully parametric 5-band, 2-channel filter system with unique solo switching capabilities
- Variable Q-factor from 0.3 to 15 (optionally from 0.3 to 10 and additional high- and lowpass)
- Interruption-free power supply
ROGE0000001
Nouveau
Roger Schult - UF1 - Universal filter with M/S matrix
UF1 functions
- Full parametric 5 band hi-end filter for mastering
- Solo switch in every filter band
- Control and adjusting stereo width
- Channel control with side switch
- Link or unlink all or some filters
- Switchable M/S matrix with SOLO switch for M/S
- Phase corrected SOLO buttons for L/R and M/S signals
- Input gains L and R adjustable to balance the center
- Phase switch flips the phase 180 degrees of channel L
- Control switch for mono compatibility
- 4 operating modes for M/S and stereo
The fully analogue filter system UF1 with integrated M/S-matrix is a versatile processing tool for Stereo- and M/S-signals in mastering environments.
The unique operating principle of UF1 allows the weighting of all variables in the frequency-domain. Beside, it lets you localize and position any single sound source within the stereo image. Fading-in/out of particular musical instruments and voices without affecting overall signal quality is easily done with the high-precision filter units of UF1.
UF1 is capable of splitting any stereo signal into its mid and side signals to process these signals separately by 10 fully parametric filters. The system comprises control units for stereo base and a filter of 12 or 24dB/oct for vinyl cut. Any filter unit can be activated/deactivated by solo switches - frequency and Q-factor are controlled by high-precision ELMA®-switches and can be reproduced instantly.
Applications
Mastering, vinyl mastering and disk cutting, M/S recording, stereo recording
Features And Specs
Technical Data
| Filter | |
| Filter bands, 23-position switch | 17Hz - 815Hz / 50Hz - 2,3kHz / 125Hz - 6kHz / 350Hz - 18,8kHz / 1,2kHz - 25kHz |
| Gain control with center detent | ± 5 dB range (± 10 dB optional ) |
| Custom gain control options: | |
| 23-position ELMA switches | ± 5.5 dB: resolution of ± 0.5 dB (or ± 11 dB: resolution of ± 1 dB) |
| 41-position Alps pot, RK27alps | ± 5 dB: resolution of ± 0.25 dB (or ± 10 dB: resolution of ± 0.5 dB) |
| Optional Q-factor controls: | |
| Q-factor, 11-position | 0.3 / 0.5 / 0.7 / 1.0 / 1.5 / 2.5 / 4 / 6 /10 / 12 / 15 (band 2, 3, 4) |
| Q-factor, 11-position | LP / 0.3 / 0.5 / 0.7 / 1.0 / 1.5 / 2.5 / 4 / 6 / 10 / HP (band 1, 5, serially s. 2016) |
| focus - button | reverse function of gain control |
| solo - switch | solo functions |
| off - switch | enable / disable filter module |
| Input section | |
| phase L - switch | phase reverse left channel |
| mono - switch | sum of L & R channels to check mono compatibility |
| reverse - switch | channel swap L / R |
| 2 gain controls with center detent | ± 5 dB range |
| M/S Section | |
| stereo-width control | continuously variable from 0 to 2 (mono - super wide) with center detent |
| stereo-width toggle switch | compare switch to toggle default stereo width |
| mode selector | choice of input and output modes: St-MS / St-St / off / MS-St / MS-MS |
| M - switch | solo cue of the mid signal |
| S - switch | phase-corrected solo cue of the side signal |
| Input - electronically balanced | |
| Reference input level | +6 dBu |
| Maximum input level | + 28 dBu |
| Input impedance | 47 kOhm |
| Output - electronically balanced | |
| Reference output level | +6 dBu |
| Maximum output level | +30 dBu |
| Output impedance | 50 Ohm |
| Harmonic distortion | THD+N 0,03% (20 Hz - 40 kHz) |
| Input and output connectors | XLR , balanced |
| Frequency range | 20 Hz - 40 kHz, Δ = -0.4 dB |
| Delay time of hard bypass relais | max. 3 ms |
| Power supply | 100-230 V AC, 47-63 Hz, max.110 Watt, optional ext. power supply N2304 |
| Dimensions | 19“ / 5 RU, 483 x 177 x 330 mm (width x height x depth) |
| Weight | 7.85 kg incl. power supply, 6.70 kg without power supply |
| External power supply N2304 | 4.9 kg |
Features
(beginning with SN # 0008)- Phase and channel swap of the inputs
- Mono compatibility switch
- Continuously variable input gain control between -10 dB and +10 dB
- Stereo-width control from 0 to 2 (mono - super wide) plus default stereo toggle switch
- Phase-corrected solo cue function for mid and side signals
- 4 modes of operation for M/S and stereo mastering
- Fully parametric 5-band, 2-channel filter system with unique solo switching capabilities
- Variable Q-factor from 0.3 to 15 (optionally from 0.3 to 10 and additional high- and lowpass)
- Interruption-free power supply
