Performance | |
Frequency response | 40Hz - 40kHz |
Maximum SPL | 113dB SPL (peak @ 1m) |
Electronic section | |
Inputs Type / Impedance
Connector Sensitivity |
Electronically balanced / 10 kOhms
XLR Adjustable, +4dBu or -10dBV |
Bass - Midrange
Treble |
150W rms, BASH® technology
100W rms, class AB |
Power supply
Local supply Connection |
230V (1.6A fuse rating) 115V (3.5A fuse rating) IEC inlet and detachable power cord |
User controls and indicators | Input sensitivity selection switch Adjustable tweeter and woofer levels by potentiometers On/off switch, voltage selector |
Light indicator | Power On LED |
Transducers | |
Woofer | 6W4370B, 61/2" (16.5cm) Focal “W” composite sandwich cone drivers |
High frequency | TB871, Focal Beryllium inverted dome tweeter |
Shielding | Integral through cancellation magnets / cans or by magnet design |
Cabinetwork | |
Construction | 71/2" (19mm) MDF panels |
Finish | Dark red natural veneering side panels, black body |
Dimensions | (HxLxD) 13 x 97/16 x 117/16"(330mm x 240mm x 290mm) |
Weight | 24.2lb (11kg) |
FOCALS942J
Nouveau
Date de disponibilité:
The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" “W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control.
Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.
The Solo6 studio monitor is equipped with a Beryllium inverted dome tweeter: capable of covering 5 octaves from 1,000 to 40,000 Hz, it reproduces high frequencies with the fastest impulse response and the best transparency in the world. In addition to this, the 6.5-inch woofer, with its ‘W’ composite sandwich cone, guarantees exceptional loudspeaker neutrality, a full lower mid-range register and bass control.
The development of the Solo6 loudspeaker’s bass/mid-range power stage relies on BASH® technology, which is the only one to offer class AB sound quality combined with the efficiency of class D amplification. For the amplification of the tweeters, a class AB power stage was used, which is powerful enough to sufficiently meet the low energy needs high frequencies require. This choice gives it an extremely wide frequency range and remarkable precision.
Performance | |
Frequency response | 40Hz - 40kHz |
Maximum SPL | 113dB SPL (peak @ 1m) |
Electronic section | |
Inputs Type / Impedance
Connector Sensitivity |
Electronically balanced / 10 kOhms
XLR Adjustable, +4dBu or -10dBV |
Bass - Midrange
Treble |
150W rms, BASH® technology
100W rms, class AB |
Power supply
Local supply Connection |
230V (1.6A fuse rating) 115V (3.5A fuse rating) IEC inlet and detachable power cord |
User controls and indicators | Input sensitivity selection switch Adjustable tweeter and woofer levels by potentiometers On/off switch, voltage selector |
Light indicator | Power On LED |
Transducers | |
Woofer | 6W4370B, 61/2" (16.5cm) Focal “W” composite sandwich cone drivers |
High frequency | TB871, Focal Beryllium inverted dome tweeter |
Shielding | Integral through cancellation magnets / cans or by magnet design |
Cabinetwork | |
Construction | 71/2" (19mm) MDF panels |
Finish | Dark red natural veneering side panels, black body |
Dimensions | (HxLxD) 13 x 97/16 x 117/16"(330mm x 240mm x 290mm) |
Weight | 24.2lb (11kg) |
Focal - Solo 6