Focal - Shape 50 Agrandir l'image
Frequency response (+/-3dB)50Hz - 35kHz
Maximum SPL (musical signal) 106dB SPL
(peak @ 1m)
Electronic section
Inputs/ImpedanceType XLR: balanced 10kOhms
Connectors RCA: unbalanced 10kOhms with sensitivity compensation
Midrange and low frequency amplifier 60W, class AB
High frequency amplifier 25W, class AB
Automatic standby Standby on After approximately 30 minutes with no signal
Standby off Signal detection > 3 mV
Electrical supplyVoltages 220-240V (T800mAL / 250V fuse) or 100-120V (T1.6AL / 250V fuse)
Connection IEC plug and detachable power cord
Settings High pass filter Adjustable Full range 45/60/90Hz
Bass (0 - 250Hz) Adjustable, +/-6dB
Midrange/bass (160Hz, Q=1) Adjustable, +/-3dB
High (4.5 - 35kHz) Adjustable, +/-3dB
Power On/Power Off On/off switch on rear panel
Standby consumption < 0.5W
Displays and controls LED for power on/off and standby
Transducers
Woofer 5" (13cm) Flax Cone
Tweeter 1" (25mm) 'M' profile Aluminum-Magnesium
Cabinet
Construction 0.6" (15mm) MDF
Finish Vinyl, real walnut and black painting
Dimensions with four rubber feet (HxWxD) 12.3 x 7.5 x 9.5" (312 x 191 x 242mm)
Weight 20.7lb (6.5kg)

Plus de détails

FOCA248F6D

Nouveau

Focal - Shape 50

Focal

Shape 50 is the versatile monitoring loudspeaker par excellence. This monitor can be used from 30″ away (80cm), and it has very extended low end frequency response (50Hz) considering its compact design. Thanks to this design and to the numerous settings, this monitor is ideal for rooms measuring less than 130ft2 (12m2).

The three monitors are all made in France and integrate five innovations to maximise acoustic transparency. Designed to meet the needs of nearfield monitoring, Shape monitors combine an ingenuous design and numerous settings optimised for the acoustics of small listening rooms.

These innovations provide remarkable acoustic transparency. These new work tools distinguish themselves through the wide and extremely precise stereo image. The bass register is articulated and controlled. The lower mid-range and mid-range benefit from extreme neutrality, and without any masking effects, making equalisation of these essential registers much easier. Finally, the new tweeter is what’s at the source of the very high definition. It efficiently reveals any hissing, and it’s also very precise in the very high end.

Flax sandwich cone

Recent technology has proven to be a considerable improvement, in terms of weight, rigidity and damping.

N.I.C.

The magnetic field is very difficult to control in order to avoid distortions. Our research enabled us to come up with an extremely stable magnetic circuit: Neutral Inductance Circuit technology.

TMD surround

This technology provides a linear frequency response curve between 1 and 2kHz, while significantly reducing distortion in the same range. The mid-range register benefits from remarkable neutrality, and it contributes to the great precision of the overall stereo image.

Key features

  • Tweeter with very low directivity for a flexible listening position
  • Designed without a port, but with a double passive radiator, allowing it to be placed near a wall.
  • Numerous settings for optimal integration
  • Accurate control, even in the very high end
  • Flax sandwich cone: controlled and articulated bass, natural and detailed lower mid-range and upper mid-range registers.
  • Mounting mechanisms present on the back and underneath the loudspeaker: for installing on a table stand, a microphone stand, the ceiling or a wall (Mounting accessories not supplied).

Features And Specs

Frequency response (+/-3dB)50Hz - 35kHz
Maximum SPL (musical signal) 106dB SPL
(peak @ 1m)
Electronic section
Inputs/ImpedanceType XLR: balanced 10kOhms
Connectors RCA: unbalanced 10kOhms with sensitivity compensation
Midrange and low frequency amplifier 60W, class AB
High frequency amplifier 25W, class AB
Automatic standby Standby on After approximately 30 minutes with no signal
Standby off Signal detection > 3 mV
Electrical supplyVoltages 220-240V (T800mAL / 250V fuse) or 100-120V (T1.6AL / 250V fuse)
Connection IEC plug and detachable power cord
Settings High pass filter Adjustable Full range 45/60/90Hz
Bass (0 - 250Hz) Adjustable, +/-6dB
Midrange/bass (160Hz, Q=1) Adjustable, +/-3dB
High (4.5 - 35kHz) Adjustable, +/-3dB
Power On/Power Off On/off switch on rear panel
Standby consumption < 0.5W
Displays and controls LED for power on/off and standby
Transducers
Woofer 5" (13cm) Flax Cone
Tweeter 1" (25mm) 'M' profile Aluminum-Magnesium
Cabinet
Construction 0.6" (15mm) MDF
Finish Vinyl, real walnut and black painting
Dimensions with four rubber feet (HxWxD) 12.3 x 7.5 x 9.5" (312 x 191 x 242mm)
Weight 20.7lb (6.5kg)

Commander

Focal - Shape 50

Focal - Shape 50

Veuillez patientez...

Pour le moment, M2M Pro a choisi la relation directe avec ses clients.
Les ventes, demandes d'offres et prix... se font via ce formulaire.
N'hésitez pas à prendre contact avec nous pour toute autre question.












* Champ requis