Phoenix Audio – Ascent One EQ Agrandir l'image
1U half rack space unit With 240V/110V mains voltage input selector switch (optional 19" rack kit)
Class A (DSOP2) Output specs. Frequency response 20Hz to 20kHz +- 0.5dB, Maximum Output = +26dBu @ 1kHz, Noise = -90dB @ 20Hz to 20kHz.
Output connections XLR’s and TRS 1/4″ Jack on rear
Phoenix Audio’s unique Class A, transformerless, True balanced Mic input stage. Microphone inputs XLR’s on Front and Rear Panels
Phoenix Audio’s unique Class A, transformerless, True balanced Mic input stage. Microphone inputs XLR’s on Front and Rear Panels
Individual Earth Lift Push-button Switches
Gain Range (Mic input) -30 to -70 in 5dB steps With 10dB more available on the fader.
Gain reduction -15dB push-button pad switch (Mic input only)
High Input Impedance DI Mono 1/4″ Jack on front panel
Gain Meter LED Metering. (Green = 0dB, Red= +8dB, corresponding to “4” and “6” on a PPM Meter).
Phantom Power Switchable phantom on Push-button Switche
High Pass Filter on Push-button Switch 
Vari-filter control 70hz to 400hz on a 21 postion detented control
Phase Reverse on Push-button Switch
Frequency Response Mic Input Stage -0.4dB @ 40Hz, -0.3dB @ 25kHz
Frequency Response DI Input Stage -0.3dB @ 40Hz, – 0.5dB @ 25kHz
Typical Headroom +26dB on Mic-Pre stage
DI Stage gain Maximum of 30dB
Gyratory-based EQ Frequency Centres (4 Bands) High – 25K 15K, 10K, Hi Mid – 6K, 3K, 1K6, Low Mid – 800Hz, 400Hz, 200Hz, Low – 130Hz, 80Hz, 40Hz
EQ Cut/Boost Levels 16dB Cut/Boost Per Band with fully detented pots in 21 positions
All units are wired with PTFE silver military grade cable

Plus de détails

PHOE8F323B

Nouveau

0 € HT

Prix conseillé: 0 €
Vous économisez: 0 € (0.00 %)

Phoenix Audio – Ascent One EQ

Phoenix Audio

An EQ As Versatile As It Is Unique

Phoenix Audio's Ascent Gyrator EQ is one of today's most unique and musical EQs, allowing an incredible variety of sounds useful for everything from clean high-headroom mix buss tone shaping to deep frequency carving to smooth Class-A circuit saturation. Available either in our remarkable mono or dual mono Class-A Ascent Mic Preamp/DIs in a stereo 1RU unit, the Ascent Gyrator EQ is as powerful as it is fun to use.

4-Bands of Gyration

The Gyrator EQ was first developed during what most consider the golden age of solid-state analog audio design: the 1970s. Originally designed to emulate the characteristics of an active inductor EQ (think Neve, API), the Gyrator EQ uses a rather clever combination of an amplifier, resistors and capacitors to accomplish incredibly smooth and musical frequency modifications. The modern-day Phoenix Ascent Gyrator EQ gives you High, High-Mid, Low-Mid and Low frequency bands, each notched to proven frequencies from a shimmering 25kHz on down to a thumping 40Hz. There's also a high pass filter at 80Hz, which can eliminate rumble or be used "against" low-end boosts for an extra range of unique EQ curves (think: Pultec). Even at extreme boosts and cuts, the Ascent Gyrator EQ's uniquely musical filters maintain the core quality of your original signal, allowing you to make bold, gut-level EQ moves that won't sound harsh, slurred or out of phase. Used more subtly, these four filters are capable of highly coherent tone shaping suitable for full mixes and mastering.

Driving the Output Circuit for More Tone Shaping

Phoenix Audio's renown DSOP-2 output amplifier, with its custom-wound transformer, is able to deliver everything from ultra-clean signals with abundant headroom to fat, fully saturated tones. By lowering the input attenuator and boosting the output signal, one can drive the DSOP-2 output stage for a wide variety of lush, Class-A saturation. Or, do the opposite—back off on the output while boosting the input—and you'll get huge, clean, hi-fi tones. Many engineers even use the Ascent Gyrator EQ completely flat in order to simply add the musicality of our proprietary amplifier circuits.

Versatile And Effortless, Day After Day

The Ascent Gyrator EQ is a powerfully versatile, high-quality studio tool. Unlike many Class-A EQs that just do "their thing" due to inherent distortion characteristics, the Ascent Gyrator EQ keeps the input signal clean, making it possible for the engineer to keep tones transparent or saturate them to taste. Importantly, doing so is effortless and intuitive due to the Ascent Gyrator's straight-forward design and unerring musicality. Those who own this EQ tell us that it quickly becomes their "go to EQ"—used effortlessly every day across a vast variety of instruments, voices and full mixes.

Sheen Control

Our new sheen control brings life and vitality to your vocals and instruments by adding a super high freqency boost or cut and adding a sheen.

  • 2 formats
    • Ascent One EQ -  Gyrator EQ with Preamp/DI: Stereo 1RU with our Ascent Series Preamp/DI.
    • Ascent Two EQ Gyrator EQ with Preamp/DI: Mono 1/2RU with our Ascent Series Preamp/DI.
  • 4 Bands of Gyrator EQ + High-Pass Filter
    • High – 15K, 10K, 25K 'sheen band'
    • Hi Mid – 6K, 3K, 1K6
    • Low Mid – 800Hz, 400Hz, 200Hz
    • Low – 130Hz, 80Hz, 40Hz
    • High Pass Filter at 80Hz, 12dB/octave
  • EQ Cut/Boost Levels
    • 16dB Cut/Boost Per Band
    • all EQ bands are stepped/detented to 21 positions for easy recall & stereo operations for mastering or the mix bus.
  • Phoenix Audio's Class-A DSOP-2 Output Amplifier with custom-wound transformer.

Features And Specs

1U half rack space unit With 240V/110V mains voltage input selector switch (optional 19" rack kit)
Class A (DSOP2) Output specs. Frequency response 20Hz to 20kHz +- 0.5dB, Maximum Output = +26dBu @ 1kHz, Noise = -90dB @ 20Hz to 20kHz.
Output connections XLR’s and TRS 1/4″ Jack on rear
Phoenix Audio’s unique Class A, transformerless, True balanced Mic input stage. Microphone inputs XLR’s on Front and Rear Panels
Phoenix Audio’s unique Class A, transformerless, True balanced Mic input stage. Microphone inputs XLR’s on Front and Rear Panels
Individual Earth Lift Push-button Switches
Gain Range (Mic input) -30 to -70 in 5dB steps With 10dB more available on the fader.
Gain reduction -15dB push-button pad switch (Mic input only)
High Input Impedance DI Mono 1/4″ Jack on front panel
Gain Meter LED Metering. (Green = 0dB, Red= +8dB, corresponding to “4” and “6” on a PPM Meter).
Phantom Power Switchable phantom on Push-button Switche
High Pass Filter on Push-button Switch 
Vari-filter control 70hz to 400hz on a 21 postion detented control
Phase Reverse on Push-button Switch
Frequency Response Mic Input Stage -0.4dB @ 40Hz, -0.3dB @ 25kHz
Frequency Response DI Input Stage -0.3dB @ 40Hz, – 0.5dB @ 25kHz
Typical Headroom +26dB on Mic-Pre stage
DI Stage gain Maximum of 30dB
Gyratory-based EQ Frequency Centres (4 Bands) High – 25K 15K, 10K, Hi Mid – 6K, 3K, 1K6, Low Mid – 800Hz, 400Hz, 200Hz, Low – 130Hz, 80Hz, 40Hz
EQ Cut/Boost Levels 16dB Cut/Boost Per Band with fully detented pots in 21 positions
All units are wired with PTFE silver military grade cable

Commander

Phoenix Audio – Ascent One EQ

Phoenix Audio – Ascent One EQ

0 €

Veuillez patientez...

Pour le moment, M2M Pro a choisi la relation directe avec ses clients.
Les ventes, demandes d'offres et prix... se font via ce formulaire.
N'hésitez pas à prendre contact avec nous pour toute autre question.












* Champ requis