Buzz Audio,Elixir Agrandir l'image
Min Gain Mic +22dB (-2dB with pad in)
Max Gain Mic +70dB
Min Gain Instrument +12dB (-3dB with pad in)
Max Gain Instrument +60dB
Maximum Output Level +34dBu into 3k ohm load
Frequency Response Mic 10Hz to 300kHz @ 20dB gain (-3dB)
Frequency Response Instrument 10Hz to 120kHz @ 20dB gain (-3dB)
Slew Rate 30V/uS @ +20dBu output level
Harmonic Distortion measured at -20dBu input level, gain adjusted for +10dBu output level                 Mic: 0.15% @ 100Hz, 0.01% @ 1kHz, 0.005% @ 10kHz
                Instrument: 0.15% @ 100Hz, 0.015% @ 1kHz, 0.015% @10kHz
EIN Mic -132.5dB A wtg, 150ohm source Z
Signal to Noise Ratio Mic -73dB A wtg, input shorted
Signal to Noise Ratio Instrument -76dB A wtg, input shorted
CMNR Mic -78dB @ 100Hz, -100dB @ 1kHz, -100dB @ 10kHz
Input Impedance Mic 4k ohms/1k2 ohms switchable
Input Impedance Instrument 1MEG ohms/20k ohms switchable
Size (37Wx132H). Fits 1 space in API 500 series rack format
Power requirements 150mA +/- 15-18 volts DC, as supplied by frame power supply

Plus de détails

BUZZMFA7SQ

Nouveau

0 € HT

Prix conseillé: 0 €
Vous économisez: 0 € (0.00 %)

Buzz Audio,Elixir

Buzz Audio

audio path quality
All discrete signal path using our True Class A BE40 amplifiers at the input and BE50 high current line drivers to excite the Lundahl LL1517 output transformer. The topology is quite different to most other mic preamps in that it is balanced from input to output. The instrument input features our BE43 "bootstrapped FET" high impedance interface that really pumps as a bass DI.

mojo not mud
The Elixir is an ideal compliment to other 500 series preamps that feature a dark or middly sound. The wide frequency response and fast transient response plus color from the output transformer generate a "warm sweet liquid" sound quality that sets it apart from that crowd. These attributes make the Elixir particulary good at recording percussion, drums (you need to hear it on snare), vocals and stringed instruments. When used at high gains and high output levels the sound of the Elixir does not turn "dirty", unlike preamps with poor slew rate performance thereby generating dynamic distortions.

specs that matter
As with all our preamps, the Elixir noise floor is as low as we can make it under the laws of physics and there is plenty of gain for low output ribbon and dynamic microphones. The output headroom at +34dBu is outstandingly unique in the 500 series format, and adds a feeling of real effortlessness to the sound quality. The transformer-less mic input presents a "non-reactive" load to the microphone which means you hear exactly what the microphone manufacturer intended, without the unpredictable nature of an input transformer.

controls and functions

  • GAIN - 41 detented pot that sets gain between +22 to +70dB.
  • POLARITY - normal or reverse polarity switched at the input inverts the signal 180 degrees, used to match spaced microphones such as top and bottom snare drum..
  • 20dB PAD - this switch introduces a 20dB pad right at the mic input for high level signals. Because it is part of the input circuit network, using the pad does not change the sound of the preamplifier.
  • IMPEDANCE - selects high or low input impedance. For the mic input it is 3kohms or 1kohms. There is no right or wrong setting for this function but it can change the tone of dynamic and ribbon microphones. When using the DI input it is switched 1MEG ohms or 20k ohms, which may similarily alter the tone of bass or guitar pickups.
  • +48V - switches on the phantom power for condensor microphones and powered DI boxes.
  • METER - four leds give visual indication of peak output level.

Features And Specs

Min Gain Mic +22dB (-2dB with pad in)
Max Gain Mic +70dB
Min Gain Instrument +12dB (-3dB with pad in)
Max Gain Instrument +60dB
Maximum Output Level +34dBu into 3k ohm load
Frequency Response Mic 10Hz to 300kHz @ 20dB gain (-3dB)
Frequency Response Instrument 10Hz to 120kHz @ 20dB gain (-3dB)
Slew Rate 30V/uS @ +20dBu output level
Harmonic Distortion measured at -20dBu input level, gain adjusted for +10dBu output level                 Mic: 0.15% @ 100Hz, 0.01% @ 1kHz, 0.005% @ 10kHz
                Instrument: 0.15% @ 100Hz, 0.015% @ 1kHz, 0.015% @10kHz
EIN Mic -132.5dB A wtg, 150ohm source Z
Signal to Noise Ratio Mic -73dB A wtg, input shorted
Signal to Noise Ratio Instrument -76dB A wtg, input shorted
CMNR Mic -78dB @ 100Hz, -100dB @ 1kHz, -100dB @ 10kHz
Input Impedance Mic 4k ohms/1k2 ohms switchable
Input Impedance Instrument 1MEG ohms/20k ohms switchable
Size (37Wx132H). Fits 1 space in API 500 series rack format
Power requirements 150mA +/- 15-18 volts DC, as supplied by frame power supply

Commander

Buzz Audio,Elixir

Buzz Audio,Elixir

0 €

Veuillez patientez...

Pour le moment, M2M Pro a choisi la relation directe avec ses clients.
Les ventes, demandes d'offres et prix... se font via ce formulaire.
N'hésitez pas à prendre contact avec nous pour toute autre question.












* Champ requis