Filtrer les produits
Modules 500 Il y a 109 produits.
-
RUPERT NEVE - 551
RUPERT NEVE - 551
Equalizer Bypassed Noise: Measured at Main Output, un-weighted, 22Hz-22kHz, source impedance 40 Ohms balanced. Better than -102dBV Frequency Response Main output, no load +/- 0.1dBu from 20Hz to 31.5kHz -1dB @ 120kHz Maximum Output Level 23.25dBu Total Harmonic Distortion and Noise @ 1kHz, +20dBu output level, no load. Better than 0.0025% @ 20Hz, +20dBu...
-
-
-
-
Trident - 80B-500
Trident - 80B-500
Four Band Eq Sweepable Mid Bands Lo Freq can be switched between 60 and 120Hz Hi Freq switchable between 8 and 12KHz Lo Mid sweepable from 100 to 1.5KHz Hi Mid sweepable from 1 to 15KHz 50Hz Hi Pass Switch Peak Overload LED Bypass Switch
-
TRIDENT - Hi-Lo 500 Tracking Filters
TRIDENT - Hi-Lo 500 Tracking Filters
Input Impedance 10 kilohms Max Input +27dBu Max Output +27dbu (Into 600ohms) Distortion (+10dBu Out) 0.0031% (20Hz to 20kHz)(Hi Enabled Max Freq)(Lo Enabled Min Freq) Distortion (+20dBu Out) 0.0069% (20Hz to 20kHz) Frequency Response 15Hz to 60kHz (-3dB) Noise (20Hz to 20kHz bandwidth limited)No Filters in circuit (Residual Noise) -95dBu High Cut Enabled...
-
TRUE SYSTEMS - P-Solo
TRUE SYSTEMS - P-Solo
Gain (microphone): . +16 to +64 dB. Gain is +6dB with Input Attenuation activated. Gain (direct input): -4 to +44 dB. Gain is -14dB with Input Attenuation activated. Frequency Response (gain=40 dB): 1. 5 Hz to 500 kHz (+0/-3 dB) Maximum Output Level: +31 dBu Maximum Input Level: +25 dBu Input Impedance (microphone): 5. 5 kOhms Input Impedance (direct...
-
TRUE SYSTEMS - PT2-500
TRUE SYSTEMS - PT2-500
Max. Output (1% THD): +29 dBu THD+N (+26dBu, GAIN = 40dB): 0.0004% typ. Max.Input (no pad): +22dBu (+28dBu Output at min. gain) Frequency Response (Gain = 40dB): 1.5Hz to 600KHz (-3dB) HPF: 80Hz Low Gain Range, preamp: 6dB to 58dB High Gain Range, preamp: 18dB to 70dB Input Impedance, preamp: 5.5Kohm Low Gain Range, DI: -14dB to 38dB High Gain Range, DI:...
-
TUBE TECH - CM1A
TUBE TECH - CM1A
Impedance Input: 6 00 ohm Output: < 60 ohm Frequency response @ -3 dB: 5 Hz to 25 kHz Distortion THD+N @ 40 Hz 0 dBu < 0,15 % +10 dBu < 0,15 % Max. output: +26 dBu < 1 % Max input: +21 dBu < 1 % Noise Line Rg=200 ohm Gain: 0 dB +30 dB 22Hz-22kHz: < -85 dBu < -75 dBu CCIR-468-4: < -75 dBu < -65 dBu CMRR @ 10 kHz: < -60 dB...
-
TUBE TECH - EM1A EQ
TUBE TECH - EM1A EQ
Impedance Input: 600 ohm Output: < 60 ohm Frequency response @ -3 dB: 5 Hz to 40 kHz Distortion THD+N @ 40 Hz 0 dBU < 0,15 % +10 dBU < 0,15 % Max. output: +26 dBU < 1 % Max input: +21 dBU < 1 % Noise Line Rg=200 ohm 22Hz-22kHz: < -85 dBU CCIR-468-4: < -75 dBU CMRR @ 10 kHz: < -60 dB Gain: 0 dB Tubes ECC 82 1 pcs. ECC 83 1 pcs....
-
TUBE TECH - PM1A
TUBE TECH - PM1A
Impedance Mic Input: 600/1200/2400 ohm DI input: >1 Mohm/82 pF Output: < 60 ohm Frequency response @ -3 dB: 5 Hz to 60 kHz Distortion THD+N @ 40 Hz 0 dBU < 0,20 % +10 dBU < 0,20 % Max. output: +26 dBU < 1 % THD Max input without PAD: +6 dBU < 1 % THD Max input with PAD: +6 dBU < 1 % THD Noise Rg=200 ohm Gain: +20 dB +60 dB...
-
