Technical Data High frequency filter (x10), “up” position 2 kHz to 23.2 kHz Mid frequency filter (x1), “center” position 200 Hz to 2.3 kHz Low frequency filter (x0.1), “down” position 20 Hz to 233 Hz Gain, continuously variable rotary control +/- 10 dB range Q-factor, 11-position switch 0.3 / 0.5 / 0.7 / 1.0 / 1.5 / 2.5 / 4 / 6 / 10as well as LP and HP...
Technical Data High frequency filter (x10), “up” position 2 kHz to 23.2 kHz Mid frequency filter (x1), “center” position 200 Hz to 2.3 kHz Low frequency filter (x0.1), “down” position 20 Hz to 233 Hz Gain, continuously variable rotary control +/- 10 dB range Q-factor, 11-position switch 0.3 / 0.5 / 0.7 / 1.0 / 1.5 / 2.5 / 4 / 6 / 10as well as LP and HP...
Technical Data Low band EQ, adjustable frequency 45 Hz / 66 Hz / 90 Hz Gain, continously variable +/- 12 dB range via fader Mid band frequency 155 Hz to 3.5 kHz, continously variable Gain, continously variable +/- 10 dB range via rotary control Q-factor, 3-position switch narrow, medium, wide(Q-factor 1.5 / 0.7 / 0.4) High band EQ, adjustable frequency...
Specifications Equivalent Input Noise (66dB gain, 150Ω source) -121dBu Input Impedance 1200Ω balanced Recommended Source Impedance 150Ω balanced Maximum Input Level +22dBu rms Maximum Output Level +25dBu rms Output Impedance <300Ω balanced Recommended Load Impedance >10kΩ balanced Gain Range 3dB steps, 33-66dB Input Attenuator Variable, -10 to 0dB...
Gain Range: Continuously variable from 6 dB to +20 dB. Threshold Range: Continuously variable from 36 dB to +22 dB. Ratio Range: Continuously variable from 1.1:1 to Limit (40:1). Attack Range: Continuously variable from 20mS to 75mS Release Range: Continuously variable from 100mS to 2.5 Seconds. FF/FB: Feed-Forward or Feed-Back VCA control. Maximum Output...
Line Amp Specifications (Measurements with tape circuit disengaged) Noise: Measured at Main Output, un-weighted, 20Hz-22kHz, Input Terminated 40 Ohms. Unity Gain Better than -100dBu Frequency Response Measured at +10dBu, trim at unity. Main Output +/- 0.25dB from 5Hz to 60Khz -2dB @ 120KHz Maximum Output Level 23.25dBu Total Harmonic Distortion and...
Gain Range: Continuously variable from 6 dB to +20 dB. Threshold Range: Continuously variable from 36 dB to +22 dB. Ratio Range: Continuously variable from 1.1:1 to Limit (40:1). Attack Range: Continuously variable from 20mS to 75mS Release Range: Continuously variable from 100mS to 2.5 Seconds. FF/FB: Feed-Forward or Feed-Back VCA control. Maximum Output...