Agrandir l'image
Pure Class A DI-RE-Microphone Preamplifier
- Pure Class A, 100% discrete design
- Forward musical detail and sonic excellence
- Minimum audio signal path
- High quality transformer input & isolated output
- Microphone and Hi-Z inputs to +36dB
- Very low noise -100dB
- High headroom +30dB
- Switched 2dB, high-gain preamplifer to +66dB
- DC coupled Pure Class A output
- Large illuminated professional VU meter
- Twin LED peak signal indicators
- Regulated +48v phantom power supply
- Low distortion less than 0.5% THD and IMD
- Variable passive high pass (bass cut) filter
- All signal routing with sealed silver relays
- Audio Circuit Topology: 100% discrete, high-voltage, Class A
- Gain: Switched 2dB steps, -/+ 0.15dB
- Input Modes (4): Line, Instrument-DI, Microphone high-Z & low-Z
- LINE (transformer): Balanced 6,000 Ω, XLR~TRS, gain -3dB~36dB, max. input 47dB
- INSTRUMENT ~ DI: Unbalanced 10,000,000 Ω, TRS, gain 2dB~42dB, max. input 36dB
- MICROPHONE HiZ (transformer): Balanced 6,700 Ω, XLR, gain 20dB ~ 60dB, max. input 23dB
- MICROPHONE LoZ (transformer): Balanced 1,760 Ω, XLR, gain 26dB ~ 66dB, max. input 19dB
- PAD (passive input attenuator): Line -13dB, Instrument -10dB & Microphone -15dB
- Phantom Power: 48V regulated @10mA, blue=power ON, red=phantom ON
- Thru output: Unbalanced, impedance buffered TRS
- Maximum line ouput level: +30dB DC coupled, balanced 600 Ω, XLR~TRS
- Maximum isolated output level: +12dB transformer balanced high Z output, TRS
- Headphone output: 0.5w into 600 Ω, TRS
- Noise 20kHz, unweighted: -100dBu minimum gain position
- Noise (EIN) 22Hz-22kHz: -128dB @ 40dB gain (low Z microphone output)
- Distortion THD, IMD: 0.05% at +10dB output
- Frequency response, -/+0.5dB: 5Hz to 50kHz
- Frequency response, -3dB: 2Hz to 500kHz (input band limited)
- VU Meter: Professional moving coil VU, wide range -33dB ~ 18dB
- Signal LED's: Peak capture, blue=0dB, red=20dB
- High Cut Filter: -3dB at 4kHz minimum phase design
- Polarity reverse (phase): All outputs relay switched (including isolated output)
- Tone Shape: Ten "passive" voices for improved clarity, problem solving and musical enhancement
- AC power: Internal toroidal AC supply, dual wattage, 115 or 230v selectable 50/60Hz, 35w max
- Dimensions: 8.5 x 3.5 x 12 in (216 x 88 x 305mm)
- Weight-packed: 12lbs (5.4kg)
- Rack mount kit (1) RM-1: Single V5 19 inch rack mount kit (holds one half rack unit).
- Rack mount kit (2) RM-2: Dual V5 19 inch rack mount kit (holds two half rack units).
AVAL1CB0A0
Nouveau
AVALON - V5
SONIC EXCELLENCE
The Avalon V5 DI-RE-MIC Preamplifer is an ultra-high performance professional preamplifier, DI and RE-amper. Created for maximum versatility, the V5's sonic signature - "Deep and Controlled Bass, Musical Mid-range and enhanced Vocal Projection" combine with a unique set of user features including, 100% discrete Pure Class A amplification, Avalon's unique "passive" TONE-BANK™, professional VU meter with dual peak LED's, multiple outputs including an instrument level transformer isolated Re-amp. Designed to optimize absolute signal integrity and musical performance, the V5 is ideal for ribbon, dynamic and condenser microphones, bass guitar, acoustic instruments, electric guitars, keyboards, synthesizers, and very low output passive pickups The state-of-the-art DI input stage provides a very-high inpedance, "zero-load" effect on sensitive pickups and keyboards, while maintaining massive input headroom to +36dB before overload.
MINIMUM SIGNAL PATH DESIGN
The V5 includes a very high quality input transformer (same as the Avalon VT-737sp) with dual microphone input impedance loading for perfect mic/cable matching, high-cut switch for eliminating unwanted acoustic pickup and high frequency noise, headphone monitor amp and DC coupled, 100% Class A output amplifiers for defined bass control. A buffered "thru" output for zero-instrument-load tuners or power amp inputs, internal toroid power transformer with discrete high-voltage power supplies for low noise and sealed silver relays for transparent signal routing.
Features And Specs
Pure Class A DI-RE-Microphone Preamplifier
- Pure Class A, 100% discrete design
- Forward musical detail and sonic excellence
- Minimum audio signal path
- High quality transformer input & isolated output
- Microphone and Hi-Z inputs to +36dB
- Very low noise -100dB
- High headroom +30dB
- Switched 2dB, high-gain preamplifer to +66dB
- DC coupled Pure Class A output
- Large illuminated professional VU meter
- Twin LED peak signal indicators
- Regulated +48v phantom power supply
- Low distortion less than 0.5% THD and IMD
- Variable passive high pass (bass cut) filter
- All signal routing with sealed silver relays
- Audio Circuit Topology: 100% discrete, high-voltage, Class A
- Gain: Switched 2dB steps, -/+ 0.15dB
- Input Modes (4): Line, Instrument-DI, Microphone high-Z & low-Z
- LINE (transformer): Balanced 6,000 Ω, XLR~TRS, gain -3dB~36dB, max. input 47dB
- INSTRUMENT ~ DI: Unbalanced 10,000,000 Ω, TRS, gain 2dB~42dB, max. input 36dB
- MICROPHONE HiZ (transformer): Balanced 6,700 Ω, XLR, gain 20dB ~ 60dB, max. input 23dB
- MICROPHONE LoZ (transformer): Balanced 1,760 Ω, XLR, gain 26dB ~ 66dB, max. input 19dB
- PAD (passive input attenuator): Line -13dB, Instrument -10dB & Microphone -15dB
- Phantom Power: 48V regulated @10mA, blue=power ON, red=phantom ON
- Thru output: Unbalanced, impedance buffered TRS
- Maximum line ouput level: +30dB DC coupled, balanced 600 Ω, XLR~TRS
- Maximum isolated output level: +12dB transformer balanced high Z output, TRS
- Headphone output: 0.5w into 600 Ω, TRS
- Noise 20kHz, unweighted: -100dBu minimum gain position
- Noise (EIN) 22Hz-22kHz: -128dB @ 40dB gain (low Z microphone output)
- Distortion THD, IMD: 0.05% at +10dB output
- Frequency response, -/+0.5dB: 5Hz to 50kHz
- Frequency response, -3dB: 2Hz to 500kHz (input band limited)
- VU Meter: Professional moving coil VU, wide range -33dB ~ 18dB
- Signal LED's: Peak capture, blue=0dB, red=20dB
- High Cut Filter: -3dB at 4kHz minimum phase design
- Polarity reverse (phase): All outputs relay switched (including isolated output)
- Tone Shape: Ten "passive" voices for improved clarity, problem solving and musical enhancement
- AC power: Internal toroidal AC supply, dual wattage, 115 or 230v selectable 50/60Hz, 35w max
- Dimensions: 8.5 x 3.5 x 12 in (216 x 88 x 305mm)
- Weight-packed: 12lbs (5.4kg)
- Rack mount kit (1) RM-1: Single V5 19 inch rack mount kit (holds one half rack unit).
- Rack mount kit (2) RM-2: Dual V5 19 inch rack mount kit (holds two half rack units).
