Summit Audio - TLA-50 Tube Leveling Amplifier Agrandir l'image

Size and Weight

Height: 1.75 inches (4.44 cm)
Witdh: 8.5 inches (21.59 cm)
Depth: 8.5 inches (21.59 cm)
Weight: 5 pounds (2.77 kg)

Power Configuration

  • Internal AC Supply
  • 20 watts, 115, 50 or 60 Hz (USA model)
  • Fuse size .5 amp, slo-blo for 100/115 V
  • Fuse size .25 amp, slo-blo at 230 V

Input Impedendance

  • Mic: 1.5K ohms
  • Hi-Z: 10K-1.75M ohms
  • Output impedance (XLR): 150 ohms

Connections

Size and Weight

  • Inputs: +4 dB female XLR and -10dB 1/4"
  • Outputs: +4 dB male XLR and 1/4" -10 dB balanced
  • Insert: 1/4" TRS balanced line level output
  • Stereo Link: 1/4" mono Jack
  • Side Chain: 1/4 stereo jack for Tip/Ring signal processing

Max input level

  • Max input level: +20 dBu
  • Max output level (XLR): +25dBu
  • Max gain: 24dBu

Operating Measurements

  • Frequency response: 20Hz-20kHz +/-1dB w/6dB compression
  • Signal to noise ratio: 120dB
  • THD + Noise: 0.05% +4dB, 3dB compression
  • Vacuum tubes: 12AX7A

Plus de détails

SUMMIT702J

Nouveau

Summit Audio - TLA-50 Tube Leveling Amplifier

Summit Audio

Ease of operation

Smooth Summit character combined with straight-forward controls make the TLA-50 a favorite in even the most high end recording facilities and live rigs.

Maximum flexibility

The TLA-50 provides a comprehensive array of inputs and outputs, allowing it to be integrated into almost any live or studio applications.

It's a family affair

The TLA-50 uses the exact same compression cell as its big brother the TLA-100A, giving you access to the same world-renowned compression sound the pros have been using for 25 years.

Really well built

The Summit Audio design philosophy considers the entire package when it comes to crafting gear. We pay special attention to the details of construction and have included many refinements over the years so units are durable enough to handle the rigors of the road. That's one of the reasons why you'll find Summit gear on tour with many of today’s top touring acts around the world.

Easy to use.

A primary design goal of the 2BA 221 was to provide an extreme amount of fine-tuning. One of the ways we achieve this is to allow you to variably adjust the mic input impedance. This opens up a wide variety of possible tones from a single microphone, turning a small mic locker into a much larger one by letting you tweak the way each of your microphones sound!

Hand-crafted in the USA

Each piece of Summit gear is meticulously crafted by hand in our shop using only the best quality components and attention to detail. Quality components and engineering know-how are the critical element to the sound and longevity of audio gear.

Features And Specs

Size and Weight

Height: 1.75 inches (4.44 cm)
Witdh: 8.5 inches (21.59 cm)
Depth: 8.5 inches (21.59 cm)
Weight: 5 pounds (2.77 kg)

Power Configuration

  • Internal AC Supply
  • 20 watts, 115, 50 or 60 Hz (USA model)
  • Fuse size .5 amp, slo-blo for 100/115 V
  • Fuse size .25 amp, slo-blo at 230 V

Input Impedendance

  • Mic: 1.5K ohms
  • Hi-Z: 10K-1.75M ohms
  • Output impedance (XLR): 150 ohms

Connections

Size and Weight

  • Inputs: +4 dB female XLR and -10dB 1/4"
  • Outputs: +4 dB male XLR and 1/4" -10 dB balanced
  • Insert: 1/4" TRS balanced line level output
  • Stereo Link: 1/4" mono Jack
  • Side Chain: 1/4 stereo jack for Tip/Ring signal processing

Max input level

  • Max input level: +20 dBu
  • Max output level (XLR): +25dBu
  • Max gain: 24dBu

Operating Measurements

  • Frequency response: 20Hz-20kHz +/-1dB w/6dB compression
  • Signal to noise ratio: 120dB
  • THD + Noise: 0.05% +4dB, 3dB compression
  • Vacuum tubes: 12AX7A

Commander

Summit Audio - TLA-50 Tube Leveling Amplifier

Summit Audio - TLA-50 Tube Leveling Amplifier

Veuillez patientez...

Pour le moment, M2M Pro a choisi la relation directe avec ses clients.
Les ventes, demandes d'offres et prix... se font via ce formulaire.
N'hésitez pas à prendre contact avec nous pour toute autre question.












* Champ requis