Rupert Neve Designs
-
RUPERT NEVE - Portico 5024
RUPERT NEVE - Portico 5024
Frequency Response:Main Output, no load,-3 dB @ 2 Hz-3 dB @ 160 kHz Noise:Measured at Main Output, unweighted, 22Hz-22kHz, Terminated 150 Ohms. With gain at unity better than -92 dBu With gain at 66 dB better than -56 dBu Equivalent Input Noise better than -123 dBu Gain: Unity to +66dB in 6 dB steps,...
-
RUPERT NEVE - Portico 5033
RUPERT NEVE - Portico 5033
EQ POINTS LMF 1st notch not numbered - 65.1 Hz 2nd notch - 120.8 Hz 4th notch - 248.9 Hz 5th notch - 354.5 Hz MF 1st notch not numbered - 443.6 Hz 2nd notch - 693.9 Hz 4th notch - 1.481 kHz 5th notch - 2.225 kHz HMF 1st notch not numbered - 2.475 kHz 2nd - 4.748 kHz 4th - 9.612 kHz 5th - 13.545 kHz LF 1st notch not numbered - 68.4 Hz 2nd - 111.3 Hz 4th -...
0 €HTVA -
RUPERT NEVE - Portico 5043
RUPERT NEVE - Portico 5043
Gain Range: Continuously variable from 6 dB to +20 dB. Threshold Range: Continuously variable from 36 dB to +22 dB. Ratio Range: Continuously variable from 1.1:1 to Limit (40:1)....
-
RUPERT NEVE - Portico 5045
RUPERT NEVE - Portico 5045
ThresholdContinuously variable from -20 to 10dBu DepthContinuously variable from 0 to 20dBu Time Constants Peak ModeA: 50mS B: 100mSC: 200mSD: 750mSE: 1.5SF: 3S RMS Mode Time Constant data collected using 10dB bursts. Attack: fixed 20mS Release: A: 20mSB: 200mSC: 1SD: 2SE: 5SF: 30S...
-
RUPERT NEVE - Portico II Channel
RUPERT NEVE - Portico II Channel
Mic PreFrequency Response: Main Output, no load -3 dB @ 2 Hz -3 dB @ 160 kHzNoise: Measured at Main Output, unweighted, 22Hz-22kHz, Terminated 150 Ohms. With gain at unity better than -92 dBu With gain at 66 dB better than -56 dBu Equivalent Input Noise better than -123 dBuGain: Unity to +66dB in 6 dB steps, Trim continuously adjustable from -6dB to...
-
RUPERT NEVE - Portico II Master Buss Processor
RUPERT NEVE - Portico II Master Buss Processor
Frequency Response: Main Output, no load, -3 dB @ 4 Hz -3 dB @ 120 kHz Maximum Output Level: Maximum output from 20 Hz to 40 kHz is +24.5 dBu. Total Harmonic Distortion and Noise: @ 1kHz, +20 dBu output: Better than 0.006% @ 20Hz, +20 dBu output: Better than 0.20% As above, Silk Blue Engaged, Texture fully CW: Better than 2.5% As above, Silk Red Engaged,...
0 €HTVA -
-
RUPERT NEVE - R6
RUPERT NEVE - R6
DC Voltage to Units +/-16VDC and +48VDC for phantom powerMax Current 1000mA for modules, 150mA for 48V phantom powerPower Requirements 100-240VAC, 50/60Hz, 50 WattsWeight 9.5lbsDimensions 13” long x 7.5”wide x 5.5” high
-
-
RUPERT NEVE - RNDI
RUPERT NEVE - RNDI
Noise: Measured Output, un-weighted, 22Hz-22kHz, source impedance 150 Ohms to 10K Ohms Better than -110dBVInput Impedance Instrument Setting: 2.2 Meg Ohm Speaker Setting: 200k OhmOutput Impedance Less than 40 OhmsFrequency Response +/- 0.25dB from 25Hz – 44kHz +/- 1dB from 12.5Hz – 63kHz -3dBu @ 92kHzMaximum Input Level Instrument = +21dBu TypicalSpeaker...
-
-
RUPERT NEVE - RNHP
RUPERT NEVE - RNHP
Maximum Input Levels "A" XLR I/P: +22.8 dBu @1kHz "B" RCA I/P: +14.7dBu @1kHz, "C" 3.5mm I/P: +3.3dBu @1kHz Output Power: As measured with typical headphones, Z=44 Ω: 3.617 VAC RMS @1kHz = 300mW RMS 16 Ω typical Load: 1.933 VAC RMS @1kHz = 230mW RMS 150 Ω typical Load: 5.108 VAC RMS @1kHz = 175mW RMS Output Impedance .08 Ω @ 1KHz, 16-150 Ω load, 0dBu...