> Drawmer

Drawmer

  • Afficher :
par page
  • DRAWMER - 1960

    INPUT IMPEDANCESLINE 20KohmMIC 150ohm to 600ohmAUX 2M2ohm MIC INPUT NOISE-128.5dB (@ +60dB gain) MAXIMUM INPUT LEVEL +20dBu OUTPUT IMPEDANCE 50 Ohm MAXIMUM OUTPUT LEVEL +22dBm (balanced) BANDWIDTH< 10Hz to 22KHz -1dB COMPRESSOR NOISE AT UNITY GAIN Wideband22Hz - 22KHz CCIR ARM IEC...

  • DRAWMER - 1961

    INPUT IMPEDANCES XLR 20KOhm INSERT 47KOhm MAXIMUM INPUT LEVEL +17dB (+21dBu) OUTPUT IMPEDANCES XLR 50 Ohm INSERT 200 Ohm FREQUENCY RESPONSE < 22Hz to 42KHz -1dB CROSSTALK <-80dB @ 10KHz <-75dB @ 20KHz INPUT CMR Better than 40dB (20Hz to 10KHz) OUTPUT BALANCE Better than 40dB (20Hz to 10KHz) NOISE AT UNITY GAIN with flat EQ response switched in...

    0 €HTVA
  • DRAWMER - 1968

    INPUT IMPEDANCEInput Impedance 20k Ohms Maximum Input Level +20dBuOUTPUTOutput Impedance 50 Ohms Maximum Output Level +21dBuBANDWIDTH < 17Hz to 28kHz -1dB < 10Hz to 47kHz -3dBUNITY GAIN NOISE 22Hz - 22kHz (RMS) -85dBCROSSTALK better than 70dB @ 10kHz better than 100dB @ 1kHzDISTORTION (THD & Noise) 1kHzLine Input with BYPASS selected <...

  • DRAWMER - 1969

  • DRAWMER - 1973

    Features Standard intuitive controls such as Threshold, Gain, Switched Attack & Release with Gain Reduction Metering on Each Band. Fast Reacting Soft Knee F.E.T. Design with excellent Left/Right Tracking across the Full Range of compression. Variable Wet/Dry Mix plus Output Gain Knobs give a 'Parallel Compression' function without the need for...

  • DRAWMER - 1968

    INPUT Input Impedance 20k Ohms or greaterMaximum Input Level +21dBu OUTPUT Output Impedance < 100 Ohms Maximum Output Level +21dBu into 10k Ohms Load FREQUENCY RESPONSE 20Hz to 20kHz +/-0.2dB CROSSTALK < -70dB @ 1kHz NOISE AT UNITY GAIN with flat EQ response switched in circuit 22Hz - 22kHz -88dB % DISTORTION (THD & NOISE) @ 1kHz 0dB (ref +4)...

  • DRAWMER - DL241

    INPUT IMPEDANCE 20KOhm MAXIMUM INPUT LEVEL +20dBu OUTPUT IMPEDANCE 50 Ohm (bal), 100 Ohm (unbal) MAXIMUM OUTPUT LEVEL +20dBu BANDWIDTH < 10Hz to 22KHz -1dB NOISE AT UNITY GAIN with Expander Off Wideband 22Hz - 22KHz CCIR ARM IEC A Q-Pk CCIR AV -90dB -95dB -95dB -97dB -84dB RMS -88dB -93dB -93dB -95dB -82dB Distortion 100Hz 1KHz 10KHz Unity Gain,...

    0 €HTVA
  • DRAWMER - DL251

    Input impedance20KOhm Maximum input level+21dBu (+17dB ref. +4dBu) Output impedance50 Ohm Maximum output level±20dBu Bandwidth< 12Hz to 25KHz - 1dB Crosstalk@10kHz Better than -80dB@20kHz Better than -70dB Noise at unity gain reference +4dBu Wideband22Hz - 22KHzCCIR ARMIEC AQ-Pk...

  • DRAWMER - DL441

    INPUT IMPEDANCE 20KOhmMAXIMUM INPUT LEVEL +21dBu (+17dB ref. +4dBu)OUTPUT IMPEDANCE50 OhmMAXIMUM OUTPUT LEVEL +20dBuBANDWIDTH < 12Hz to 35KHz -1dBCROSSTALK @10kHz Better than -80dB@20kHz Better than -75dBOUTPUT BALANCE Better than 40dB 20Hz to 10kHzINPUT CMRBetter than 40dB 20Hz to 10kHzNoise at unity gain reference +4dBu Wideband22Hz - 22KHzCCIR...

  • DRAWMER - DS101

    Features Fully featured noise gate based on the industry standard DS201. Takes up a single 500 series slot. Proprietary Hysteris or “trigger stabilization” to prevent “chatter” around the threshold. Fully variable high pass and low pass filters for “frequency conscious” gating. Comprehensive envelope control, attack, hold, decay, and range. External...

  • DRAWMER - DS201

    Input impedance20Kohms balanced Maximun input level+21.5dBu Bandwidth±1dB 20Hz to 34Hz Noise(Ref to +4dBu,gate open) -93dB(Ref to +4dBu,gate closed) -98dB Headroom(Ref to +4dBu) +16dB Dynamic Range109dB Crosstalk-93dB Key input impedance100k Distortion0dBu+10dBu 100Hz-015%-015%...

  • DRAWMER - DS404

    Input impedance20Kohm (balanced) Key input impedance20Kohm (unbalanced) Maximun input level+21dBu Maximun key input level+21dBu Output impedance50 ohm (balanced) Maximun output level+21dBu Bandwidth < 10Hz to 21 KHz -1dB Floor level-90dB,(or -20dB)...

Résultats 1 - 12 sur 14.