RADIAL - EXTC Agrandir l'image
Circuit type: Solid state with transformer coupled effects loop
Power requirement: 60mA, ±16VDC
Output Gain: 12dB - send & receive at maximum
6dB - send minimum/receive maximum
0dB - send & receive set at 12 o’clock
  Dry Wet
Frequency Response: 20Hz ~ 20kHz ±1.5dB 20Hz ~ 10kHz ±3.5dB
(-8dB @ 20kHz)
THD+N: >0.005% 0dB output >0.002% 0dB output
Noise: -93dB -84dB
Intermodulation Distortion: >0.003% 0dBu input <0.02% 0dBu input
Maximum input: +26dBu +20dBu
Effects Loop i/o Send 1/4" output Receive 1/4" input
Connector: Unbalanced ¼" Unbalanced ¼"
Impedance: 1.5k Ohms 10K Ohms
Gain (Variable) From -14dB ~ +3dB
0dB at center point
From -99dB ~ +9dB
0dB at center point
Maximum Gain: ±3dB +9dB
Line level i/o Input Output
Connector*: Balanced XLR Female
Rear Panel
Balanced XLR Male
Rear Panel
Impedance: 15k Ohms 200 Ohms
Headroom:   +25dBu

Plus de détails

RADIAL012C

Nouveau

0 € HT

Prix conseillé: 0 €
Vous économisez: 0 € (0.00 %)

RADIAL - EXTC

Radial

Radial EXTC Guitar Effects Interface

  • Balanced interface for guitar effects pedals
  • Separate send & receive controls optimize signal path
  • Transformer isolated send eliminates ground loops
  • Creative tool helps your mix stand out from the rest

The Radial EXTC is a 500 series module that lets you incorporate guitar effects into the realm of pro-audio recording. Just imagine... add a touch of grit to a vocal track, some wah on a kick drum, maybe flange a violin...The EXTC is a creative tool made for your esoteric-inventive side, ready to unleash fresh new sounds that will make your recordings stand out from the crowd.

And it's super easy to use: connect a line level signal from the recording system. The EXTC unbalances the signal and converts it to high impedance where guitar pedals can be inserted at will. Front mounted 1/4" send & receive connectors provide easy access. Turn track on, set levels, adjust the blend for just the right amount of magic. Be prepared for instant amazement. Legalized ecstasy.

Features include Radial's award winning 100% discrete class-A guitar buffering for ultimate audio integrity, transformer isolation to eliminate buzz and hum caused by ground loops, 180° polarity reverse to keep effects and balanced signals in phase, plus a separate patch bay insert point to add studio effects into the fun.

The Radial EXTC is without a doubt one of the most innovative effect manipulating devices ever made. And it opens the door to new sounds by taking Reamping technology to an all new level.

Be prepared for wild & wonderful!

Features And Specs

Circuit type: Solid state with transformer coupled effects loop
Power requirement: 60mA, ±16VDC
Output Gain: 12dB - send & receive at maximum
6dB - send minimum/receive maximum
0dB - send & receive set at 12 o’clock
  Dry Wet
Frequency Response: 20Hz ~ 20kHz ±1.5dB 20Hz ~ 10kHz ±3.5dB
(-8dB @ 20kHz)
THD+N: >0.005% 0dB output >0.002% 0dB output
Noise: -93dB -84dB
Intermodulation Distortion: >0.003% 0dBu input <0.02% 0dBu input
Maximum input: +26dBu +20dBu
Effects Loop i/o Send 1/4" output Receive 1/4" input
Connector: Unbalanced ¼" Unbalanced ¼"
Impedance: 1.5k Ohms 10K Ohms
Gain (Variable) From -14dB ~ +3dB
0dB at center point
From -99dB ~ +9dB
0dB at center point
Maximum Gain: ±3dB +9dB
Line level i/o Input Output
Connector*: Balanced XLR Female
Rear Panel
Balanced XLR Male
Rear Panel
Impedance: 15k Ohms 200 Ohms
Headroom:   +25dBu
Type de matériel Autres

Commander

RADIAL - EXTC

RADIAL - EXTC

0 €

Veuillez patientez...

Pour le moment, M2M Pro a choisi la relation directe avec ses clients.
Les ventes, demandes d'offres et prix... se font via ce formulaire.
N'hésitez pas à prendre contact avec nous pour toute autre question.












* Champ requis