RADIAL - Q3 Agrandir l'image
Audio circuit type: Coil/Capacitor/Resistive Boost and Cut Filters
Frequency response: 20Hz-20KHz +/- 1dB in non EQ positions
Dynamic range: 112dB
Noise floor: -90dBu filters off (-87dBu filters on)
Maximum input: +20dBu
Total harmonic distortion: 0.003% @ -0dBu @ 1kHz
Inter-modulation distortion: 0.002% (0dBu input)
Input impedance: 12k Ohms, balanced
Output impedance: 440 Ohms balanced
Features  
High pass filter: -3dB @ 150Hz
Gain: 7dB (maximum output, no filters)
XLR configuration: Balanced I/O, AES standard (pin-2 hot)
General  
Current draw: 25mA
Shipping size: Size: 9" x 6.25" x 2" (228 x 159 x 51mm)
Weight: 1.5lbs (0.7kg)
Compliance (API): Yes
Compliance (WHOS-Doc): Yes
Conditions: For use in dry locations only between 5°C and 40°C

Plus de détails

RADIAL757W

Nouveau

0 € HT

Prix conseillé: 0 €
Vous économisez: 0 € (0.00 %)

RADIAL - Q3

Radial

The Radial Q3 is a spectacular sounding induction coil EQ that has been formatted to fit the popular 500 series format and the Radial Workhorse. It is designed to accentuate the character of a voice or instrument without introducing the artifacts and phase anomalies commonly associated with typical gyrator (resistor-capacitor) equalizer circuits.

The Q3 features four easy to use controls: top-end boost, mid-range cut, low frequency bass boost and gain make-up to offset the signal loss that occurs when using passive equalization. Each of the three EQ bands employs a 12 position Grayhill switch with a different preset curve at each position. These are carefully crafted to introduce subtle accents, huge hype and warm sounding cuts that will flatter and enthral. Each EQ setting is augmented with a miniature toggle switch that enables you to attenuate the curve for more subtle effects to deliver over 10,000 combinations of tonal bliss. And because presets are employed, it's easy to recreate favourite patches by setting the dials with 'easy to remember' 3-number combinations.

Adapted for use with the Radial Workhorse and older API Lunchbox racks, the Radial Q3 is plug-and-play easy to use. Simply feed it with a balanced line level signal and you are set to go. When connected to a Workhorse, the Omniport is assigned as an effects loop to allow various processing devices to be inserted into the EQ signal chain.

The Q3 induction coil EQ... probably the most exciting equalizer ever made.

  • Coil EQ based on vintage EQs from the golden age
  • A stunning combination of over 10,000 tonal variations
  • Lets you color your sound with warmth and detail
  • Works with Workhorse and all 500 series power racks

Features And Specs

Audio circuit type: Coil/Capacitor/Resistive Boost and Cut Filters
Frequency response: 20Hz-20KHz +/- 1dB in non EQ positions
Dynamic range: 112dB
Noise floor: -90dBu filters off (-87dBu filters on)
Maximum input: +20dBu
Total harmonic distortion: 0.003% @ -0dBu @ 1kHz
Inter-modulation distortion: 0.002% (0dBu input)
Input impedance: 12k Ohms, balanced
Output impedance: 440 Ohms balanced
Features  
High pass filter: -3dB @ 150Hz
Gain: 7dB (maximum output, no filters)
XLR configuration: Balanced I/O, AES standard (pin-2 hot)
General  
Current draw: 25mA
Shipping size: Size: 9" x 6.25" x 2" (228 x 159 x 51mm)
Weight: 1.5lbs (0.7kg)
Compliance (API): Yes
Compliance (WHOS-Doc): Yes
Conditions: For use in dry locations only between 5°C and 40°C
Type de matériel Egaliseurs

Commander

RADIAL - Q3

RADIAL - Q3

0 €

Veuillez patientez...

Pour le moment, M2M Pro a choisi la relation directe avec ses clients.
Les ventes, demandes d'offres et prix... se font via ce formulaire.
N'hésitez pas à prendre contact avec nous pour toute autre question.












* Champ requis