Input and Output : Pin 2 is Sig + , Pin 3 is Sig- , Pin 1 is GND Connections Power: 100, 120, 230,240 volt; 50/60 Hz; 55 watts MDL 0.6A Fuse for 100V and 120V MDL 0.3A Fuse for 230V and 240V Pilot Lamp: # 7335 Shipping Weight: 19 lbs. (8.6 kg) Depth Behind Panel: 12.5 inches (31.75 cm) plus cabling Panel Height: 2 rack spaces
Connections: The input and output are balanced, with the output being transformer balanced. Signal Level: The maximum specified signal level is +26 dbu Noise Floor: -82.5 dbu measured 20Hz to 20 kHz Power: 110mA with 16 volt bipolar power supplies Tube: 12AX7B Attack Time: For a 12 db change, 100uS; 7mS; 20mS Release Time: For a 12 db change, 75mS to...
Analog Output: Transformer-less balanced floating stereo output with XLR connectors. Digital zero is +16dBm. This allows 12 db of headroom above a +4dBm 0 VU. Gain adjust trims are on the back panel Analog Input: Transformer-less balanced floating stereo with XLR connectors. Digital zero is +16dBm. This allows 12 db of headroom above a +4dBm 0 VU. Gain...
Input: Floating, balanced. Maximum input is +25 dBm. The connectors are XLR. Output: Floating, balanced. Maximum output is +25 dBm. The connectors are XLR. Input and Output : Pin 2 is Sig + , Pin 3 is Sig- , Pin 1 is GND Connections Power: 100, 120, 230,240 volt; 50/60 Hz; 55 watts MDL .6A Fuse for 100V and 120V MDL .3A Fuse for 230V and 240V Noise:...
Maximum input: +24dbu Maximum Output: +25dbu Frequency Response: 1Hz to 100KHz Noise Floor: -84 dbu 20Hz to 20KHz Input Impedance: 32K ohms Output Impedance: 160 ohms Current Consumption: 120mA Weight: 1.7 lbs Number of Channels: 1 Number of EQ Sections: 37 SWITCHED RANGES High Pass: 7 + Flat Low Pass: 7 + Flat Low Shelf: 8 (10 Hz - 200 Hz) Mid Bell: 8...
CROSS TALK measured main output, gain set to 0 1 kHZ -122 dB 10 kHz -100 dB THD + NOISE MAIN OUTPUT INPUT 0 dBFS GAIN SET TO -6 dB 0.0005% INPUT -6 dBFS 0.0003% MAIN OUTPUT MAX LEVEL +24 dbu FIXED OUTPUT MAX LEVEL +18 dbu NOISE MAIN OUTPUT GAIN =0 -93 dbu A-weighted GAIN =0 -90 dbu AES17 HEADPHONES GAIN = 0 NOISE -88 dbu , AES17 MAX OUTPUT +24 dbu POWER...
Input XLR connectors Pin 2 is Sig + , Pin 3 is Sig- , Pin 1 is GND Power: 100, 120, 230,240 volt; 50/60 Hz; 55 watts MDL 2.0A Fuse for 100V and 120V MDL 1.5A Fuse for 230V and 240V Clipping: +25 dbm in the analog section Pilot Lamp: # 7335 Shipping Depth Panel Height: 2 rack spaces for power supply 4 rack spaces for main unit
Compressor Attack Time: FAST; measured by doing 18 dB of Gain Reduction. The time to 18 dB of Gain Reduction is less than 1mS. 12 dB of the 18 are reached in .4mS. SLOW; for 6 dB of GainReduction, 100mS Compressor Release Time: FAST; From 12 dB of Gain Reduction to No Gain Reduction. 11 of 12 dB are reached in 50mS (Non Program Dependant Release) SLOW; 20...
Pad: 0, -15, -25 db steps Max Gain: 65db Filter: 90Hz 24 db/oct Power: 100mA with self resetting fuses At 40db of gain, 0dbu output and a 150 ohm source Harmonic Distortion : 0.5% second harmonic Noise: -84dbu Frequency Response: 6Hz to 80Khz Tube: 12AX7B, selected for low microphonics Lundahl Mu metal shielded transformers for both input and output
Input: Floating, balanced. Maximum input is +25 dBm. The connectors are XLR. Output: Floating, balanced. Maximum output is +25 dBm. The connectors are XLR. For Input and Output : Pin 2 is Sig + , Pin 3 is Sig – , Pin 1 is GND Side Chain Connections: Floating, balanced. Connections are made by using a DB-9 Male Connector. This is a loop insert and must be...