Thermionic Culture
-
THERMIONIC CULTURE - Culture Vulture Super 15
THERMIONIC CULTURE - Culture Vulture Super 15
Distortion (THD) at 4dB: 0.2% Frequency response: Normal drive: 40Hz to 18kHz , ±1.5dB Overdrive: 50Hz to 11kHz, ±1.5dB Max Output Level (MOL): +17dBu, 2% distortion Noise: 85dB below MOL Maximum Figures: Distortion (THD): 98% MOL: +25dBu, 20% distortion. Gain (DI input): >65dB. Impedances: Line Input: 20k Ohms DI Input: 50k Ohms Line Output: 1k Ohms...
0 €HTVA -
THERMIONIC CULTURE - The culture vulture
THERMIONIC CULTURE - The culture vulture
Maximum Output level(M.O.L): +17dBV Distortion: 0.2% to 99.5% Noise: better than 75dB below M.O.L at typical settings Input impedance: 30kΩ Output impedance: 2kΩ (should ideally drive a 10kΩ + input impedance) Frequency response: ± 1.75dB over 50Hz to 15kHz (at low distortion) Max. gain (clean): 35dB Max. gain (overdriven) >60dB
0 €HTVA -
THERMIONIC CULTURE - The Earlybird 2.2
THERMIONIC CULTURE - The Earlybird 2.2
Input impedanceMic300Ohms or 1200Ohms, switchable,balancedPad1.8kOhmsLine12.7kOhmsPullet1.2kOhmsOutput impedance < 300OhmsMaximum gain 62dBMaximum output level (MOL) +33dBm (36V RMS) Frequency response±0.5dB11Hz to 26kHz±1dB8Hz to 65kHzTotal noise, unweighted, 30kHz filter114dB below MOL EQ, active controls @ max: Bass+17dB@50HzMid+15dB@800Hz &...
-
THERMIONIC CULTURE - The Earlybird 4
THERMIONIC CULTURE - The Earlybird 4
Input impedance300Ohms or 1200 Ohms, switchable, balanced With Pad in:2kOhmsOutput impedance(a) Output level control at max(b) Output level control at min55Ohms balanced500Ohms balancedMaximum gain 62-64dBMaximum output level (MOL) +34dBmDistortion (THD) @1kHz/100Hz, unweighted, at 40dB gain0.0035% / 0.008%Frequency response±0.5dB at 40dB gain...
-
THERMIONIC CULTURE - The Fat Bustard II
THERMIONIC CULTURE - The Fat Bustard II
Input impedance: 10k Ohms (dependent upon channel and setting), unbalanced Output impedance: 600 Ohms unbalanced Monitor: 5k Ohms unbalanced Gain (ch. 1-8): 0 at Attitude 1, +11dB at max attitude Maximum Output level: +25dBU Distortion:...
-
THERMIONIC CULTURE - The little red bustard
THERMIONIC CULTURE - The little red bustard
Input impedance: 10kΩOutput impedance: 250Ω. Load impedance should be 2kΩ or greater.Distortion and MOL specs are for a load of 10kΩDistortion :(THD, unweighted, 30kHz filter) < 0.025% @ +4dBuMaximum o/p level:(MOL @ 1% distortion) +25dBuThe following specs are for Attitude 1 setting:Noise (30kHz filter): < - 82dBuFrequency response +/- 1dB: 12Hz...
-
THERMIONIC CULTURE - The nightingale 2
THERMIONIC CULTURE - The nightingale 2
Preamps A & B Compressor Input Impedance Mic Lo Mic Hi Line 600Ω 1200Ω 10kΩ N/A N/A 10kΩ...
-
THERMIONIC CULTURE - The Phoenix HG15
THERMIONIC CULTURE - The Phoenix HG15
Input impedance MIC: 1kOhms PAD: 2KOhmsLINE: 10kOhmsOutput Impedance: 600OhmsMax gain MIC: 52 dBPAD: 38 dBLINE: 25 dBTHD (30kHz filter) 1kHz: 0.12%100Hz: 0.22% N.B. Distortion may increase with compression, especially with faster settings and 12 dB + compression. Frequency response +0/-1dB 16 Hz to 50 kHzMax O/P level (MOL): + 25.5 dBu, 10kOhms...
-
THERMIONIC CULTURE - The Phoenix Mastering plus
THERMIONIC CULTURE - The Phoenix Mastering plus
Max. o/p level (MOL): +19dB into 600Ohms+24dB into 10kOhmsMax gain: 30dB.THD (at no compression): better than 0.06 % @ 100Hz & 1kHzNoise, IEC weighted: better than 100dB below MOL.Input impedance: 15kOhms.Frequency response: < 1dB variation over range of 12Hz to 56kHz.Attack time: 0.004s to 0.12sRelease time: 0.04s to 2.4sOutput impedance:...
-
THERMIONIC CULTURE - The Phoenix SB
THERMIONIC CULTURE - The Phoenix SB
Max. o/p level (MOL): +19dB into 600Ohms +24dB into 10kOhmsMax gain: 36dB.THD (at no compression): better than 0.06 % @ 100Hz & 1kHzNoise, IEC weighted: better than 100dB below MOL.Input impedance: 15kOhms.Frequency response: < 1dB variation over range of 12Hz to 56kHz.Attack time: 0.004s to 0.12sRelease time: 0.04s to 2.4sOutput impedance:...
-
THERMIONIC CULTURE - The Pullet
THERMIONIC CULTURE - The Pullet
Output impedance 1.3kOhms Input impedance 15kOhms (with Pullet eq. in and set flat, ie. no cut or boost) Maximum Mid Lift 21dB Maximum Mid Cut -17dB Max High Top Lift 6dB Max High Top Cut -9dB Frequency response withno Eq ±0.3dB 17Hz to 50kHz Input and Outputconnectors 4x3 pin XLRs, wired balanced,pin 2 hot
0 €HTVA -
- 1
- 2