Frequency response (+/- 3dB) | 40Hz - 22kHz |
Power | 105W (70W+35W) |
Maximum SPL | 106dB SPL (pic @ 1m) |
Electronic section | |
Inputs Connectors | XLR balanced 10kOhms RCA unbalanced 10kOhms with sensitivity compensation |
LF amplifier stage | 70W, class AB |
HF amplifier stage | 35W, class AB |
Standby mode Standby Activation of the monitor | After about 30 minutes without using the monitor By signal detection >3 mV |
Power supply (The voltage can not be modified) | 220-240V (fuse T800mAL/250V) or 100-120V (fuse T1.6AL/250V) |
Connection | IEC inlet and detachable power cord |
User controls | ||
Sensitivity | Adjustable, 0 or +6dB | |
LF shelving (0 - 300Hz) | Adjustable, +/-6dB | |
HF shelving (4.5 - 22kHz) | Adjustable, +/-3dB | |
Power ON/OFF | Switch on rear panel | |
Standby mode power consumption | < 0,5W | |
Indicators | Power ON/OFF LED - Standby LED | |
Transducers | ||
Woofer | 6.5" (16.5cm) drive unit - Polyglass cone | |
Tweeter | 1" (25mm) drive unit Aluminium inverted dome/ | |
Cabinet | ||
Construction | 0.6" (15mm) MDF | |
Finish | Vinyl and Black painting | |
Dimensions with 4 rubber pads (HxWxD) | 13.7x9.9x12.2" (348 x 252 x 309mm) | |
Weight | 20.7lb (9.4kg) |
FOCALA257J
Nouveau
Date de disponibilité:
The Alpha 65 performs just as well with instrumental music as with electronic music, and is characterised by its great versatility.
This model is composed of a 6.5” (16.5cm) woofer/ midrange speaker with a Polyglass cone loaded in a large laminar port associated to a 70W amplifier and of a 1" (25mm) aluminum inverted dome tweeter (35W amplifier). Alpha 65 has a frequency response of 40Hz to 22kHz (+/- 3dB).
Frequency response (+/- 3dB) | 40Hz - 22kHz |
Power | 105W (70W+35W) |
Maximum SPL | 106dB SPL (pic @ 1m) |
Electronic section | |
Inputs Connectors | XLR balanced 10kOhms RCA unbalanced 10kOhms with sensitivity compensation |
LF amplifier stage | 70W, class AB |
HF amplifier stage | 35W, class AB |
Standby mode Standby Activation of the monitor | After about 30 minutes without using the monitor By signal detection >3 mV |
Power supply (The voltage can not be modified) | 220-240V (fuse T800mAL/250V) or 100-120V (fuse T1.6AL/250V) |
Connection | IEC inlet and detachable power cord |
User controls | ||
Sensitivity | Adjustable, 0 or +6dB | |
LF shelving (0 - 300Hz) | Adjustable, +/-6dB | |
HF shelving (4.5 - 22kHz) | Adjustable, +/-3dB | |
Power ON/OFF | Switch on rear panel | |
Standby mode power consumption | < 0,5W | |
Indicators | Power ON/OFF LED - Standby LED | |
Transducers | ||
Woofer | 6.5" (16.5cm) drive unit - Polyglass cone | |
Tweeter | 1" (25mm) drive unit Aluminium inverted dome/ | |
Cabinet | ||
Construction | 0.6" (15mm) MDF | |
Finish | Vinyl and Black painting | |
Dimensions with 4 rubber pads (HxWxD) | 13.7x9.9x12.2" (348 x 252 x 309mm) | |
Weight | 20.7lb (9.4kg) |
Focal - Alpha 65