Filtrer les produits
Egaliseurs & Enhancers Il y a 54 produits.
-
-
Roger Schult - COSINUS
Roger Schult - COSINUS
Technical Data 3 Band pass filters (BP1 usable as X-Over in position "full left" (disables BP1 Q-factor function!)) Frequency range 20 Hz to 232 kHz Gain, rotary control +/- 10 dB range Q Factort, 11-position switch 0.3 / 0.5 / 0.7 / 1.0 / 1.5 / 2.5 / 4 / 6 / 10as well as LP / HP and Hard-Bypass in position "full right"...
-
-
Roger Schult - UF1 - Universal filter with M/S matrix
Roger Schult - UF1 - Universal filter with M/S matrix
Technical Data Filter Filter bands, 23-position switch 17Hz - 815Hz / 50Hz - 2,3kHz / 125Hz - 6kHz / 350Hz - 18,8kHz / 1,2kHz - 25kHz Gain control with center detent ± 5 dB range (± 10 dB optional ) Custom gain control options: 23-position ELMA switches ± 5.5 dB: resolution of ± 0.5 dB (or ± 11 dB: resolution of ± 1 dB)...
-
Roger Schult - UF2 - parametric 2 x 5 band filter system
Roger Schult - UF2 - parametric 2 x 5 band filter system
Fully parametric 2x 5-band filter Frequency range from 15 Hz to 20.1 kHz Next Q-factor from 0.4 to 15 Overlapping filter frequencies Wide control range of +/- 10 dB Bypass function for each filter Unique Solo function Separate input level for L and R Central control of the stereo bus Bypass function of all filters Switchable subsonic filter for...
-
-
RUPERT NEVE - Portico 5033
RUPERT NEVE - Portico 5033
EQ POINTS LMF 1st notch not numbered - 65.1 Hz 2nd notch - 120.8 Hz 4th notch - 248.9 Hz 5th notch - 354.5 Hz MF 1st notch not numbered - 443.6 Hz 2nd notch - 693.9 Hz 4th notch - 1.481 kHz 5th notch - 2.225 kHz HMF 1st notch not numbered - 2.475 kHz 2nd - 4.748 kHz 4th - 9.612 kHz 5th - 13.545 kHz LF 1st notch not numbered - 68.4 Hz 2nd - 111.3 Hz 4th -...
0 €HTVA -
Summit Audio - EQF-100 Tube Parametric Equalizer
Summit Audio - EQF-100 Tube Parametric Equalizer
Size and Weight Height: 3.5 inches (8.89 cm) Width: 19 inches (48.26 cm) Depth: 10 inches (25.40 cm) Weight: 17 pounds (9.45 kg) Power Configuration Internal AC Supply 35 watts, 115 or 230 volts, 50 or 60 Hz ( Switchable) Fuse: 0.5 Amp for 115VAC and 100VSC, 0.25 AMP for 230 VAC....
-
Summit Audio - EQP-200B Dual Tube Program EQ
Summit Audio - EQP-200B Dual Tube Program EQ
Size and Weight Height: 3.5 inches (8.89 cm) Width: 19 inches (48.26 cm) Depth: 10 inches (25.40 cm) Weight: 17 pounds (7.71 kg) Power Configuration Internal AC Supply 35 watts, 115 or 230 volts, 50 or 60 Hz (Rear Switchable) Fuse Size: 0.5 Amp for 115 VAC, 0.25 Amp for 230 VAC Selectable Frequencies Low...
-
Summit Audio - FeQ-50 Passive Tube EQ
Summit Audio - FeQ-50 Passive Tube EQ
Size and Weight Height: 1.75 inches (4.44 cm) Width: 8.5 inches (21.59 cm) Depth: 8.5 inches (21.59 cm) Weight: 5 pounds (2.77 kg) Power Configuration Internal AC Supply 15 watts, 115, 50 or 60 Hz (USA model) Fuse size .5 amp, slo-blo for 100/115 V Fuse size .25 amp, slo-blo at 230 V Selectable Frequencies...
-
THERMIONIC CULTURE - Culture Vulture Super 15
THERMIONIC CULTURE - Culture Vulture Super 15
Distortion (THD) at 4dB: 0.2% Frequency response: Normal drive: 40Hz to 18kHz , ±1.5dB Overdrive: 50Hz to 11kHz, ±1.5dB Max Output Level (MOL): +17dBu, 2% distortion Noise: 85dB below MOL Maximum Figures: Distortion (THD): 98% MOL: +25dBu, 20% distortion. Gain (DI input): >65dB. Impedances: Line Input: 20k Ohms DI Input: 50k Ohms Line Output: 1k Ohms...
0 €HTVA -
THERMIONIC CULTURE - The culture vulture
THERMIONIC CULTURE - The culture vulture
Maximum Output level(M.O.L): +17dBV Distortion: 0.2% to 99.5% Noise: better than 75dB below M.O.L at typical settings Input impedance: 30kΩ Output impedance: 2kΩ (should ideally drive a 10kΩ + input impedance) Frequency response: ± 1.75dB over 50Hz to 15kHz (at low distortion) Max. gain (clean): 35dB Max. gain (overdriven) >60dB
0 €HTVA